Flyswatter2 with openocd on quark

PButl2 — Wed, 10 Dec 2014 16:36:44 GMT

I got my Flyswatter2 working with openocd to debug on my Galileo, but then I wanted to try the same thing on the Industrial Reference design board.

I get the following error message when starting openocd. Any tips on how to make this work?

Open On-Chip Debugger 0.8.0 (2014-12-08-11:22)

Licensed under GNU GPL v2

For bug reports, read

Info : only one transport option; autoselect 'jtag'

adapter speed: 4000 kHz

trst_only separate trst_push_pull

Info : clock speed 4000 kHz

Info : JTAG tap: quark_x10xx.cltap tap/device found: 0x0e681013 (mfg: 0x009, part: 0xe681, ver: 0x0)

enabling core tap

Info : JTAG tap: quark_x10xx.cpu enabled

Error: tapstatus invalid - scan_chain serialization or locked JTAG access issues

Re: Flyswatter2 with openocd on quark

Allan_J_Intel1 — Thu, 11 Dec 2014 17:30:42 GMT

Thanks for joining the Intel communities.

Please address this matter here:

Allan.