topic Re: How to (re) enable http/https service for BMC web console (RMM4) in Intel® Xeon® Processor and Server Products

How to (re) enable http/https service for BMC web console (RMM4)

idata — Thu, 03 Nov 2016 11:59:55 GMT

How can I enable http/https service on the RMM4 when it has been disbaled and the web console is not available anymore?

Re: How to (re) enable http/https service for BMC web console (RMM4)

idata — Fri, 04 Nov 2016 15:49:26 GMT

Hello,

Our best recommendation is checking the :

http://www.intel.com/content/www/us/en/support/boards-and-kits/000006023.html User Guide for Intel® Remote Management Module 4 (Intel® RMM4) and Integrated BMC

Basically we recommend checking that the configuration you have is correct. If so, there is a chance the module is defective and you will need to contact our support group to replace it under warranty:

http://http//www.intel.com/content/www/us/en/support/contact-support.html Contact Support

Re: How to (re) enable http/https service for BMC web console (RMM4)

idata — Fri, 04 Nov 2016 17:51:53 GMT

Hello,

thank you for your quick response.

Sorry for the misunderstanding, but the http/https service was disabled by myself using the web console.

I initially thought I could just re-enable it using SMASH console or IPMI, but I just couldn't find a way to access the http/ web service settings. The RMM4 User guide does not consider this case. I guess the only option is a factory reset using SYSCFG. Or what method do you recommend resetting RMM4 to default settings?

Re: How to (re) enable http/https service for BMC web console (RMM4)

idata — Fri, 04 Nov 2016 21:52:26 GMT

Hello,

Your affirmation is correct, the way to reset it is using the SYSCFG. Here are the commands:

- Reset System Configurations: /RestoreFirmwareSettings or /rf

- Reset the BMC: /ResetBMC or /rbmc