topic Re:SNC doesn't worked in Intel® Xeon® Processor and Server Products

SNC doesn't worked

hxxxxjxx — Thu, 09 May 2024 08:36:59 GMT

i'm using intel xeon silver 4210 and supermicro X11DPG-QT(3.1v).

I've handled Advanced-Chipset Configuration-North Bridge-UPI Configuration-SNC to 'enable' and Advanced-Chipset Configuration-North Bridge-Memory Configuration-IMC Interleaving to '1-way Interleave' on BIOS setting. But There are still 2 numa nodes(one for each socket).

Is there any missing point to turn on SNC?

Re:SNC doesn't worked

Fikri_Intel — Fri, 10 May 2024 03:53:11 GMT

Hi hxxxxjxx,

Thank you for reaching Intel Community.

Based on your description, it is related to SuperMicro board. However, you may refer to the below document and it will show the guide with Intel SGX.

Title: Intel® Software Guard Extensions (Intel® SGX) Enabling Guide for SuperMicro Servers

URL Link: https://www.intel.com/content/www/us/en/content-details/646654/intel-software-guard-extensions-intel-sgx-enabling-guide-for-supermicro-servers.html?wapkw=Intel%C2%AE%20Software%20Guard%20Extensions%20(Intel%C2%AE%20SGX)%20Enabling%20Guide%20for%20SuperMicro%20Servers

File Name : xeon-scalable-clx-tmsdg-547814-rev2-9-1.pdf (Page 7/16)

Regards

Fikri_Intel

Re:SNC doesn't worked

Fikri_Intel — Sun, 12 May 2024 23:31:46 GMT

Hi hxxxxjxx,

Good day to you.

Just wanted to follow up with you, let us know if you require further inquiry.

Looking forward to your response.

Regards,

Fikri_Intel

Re:SNC doesn't worked

Fikri_Intel — Fri, 17 May 2024 00:47:38 GMT

Hi hxxxxjxx,

This is regarding your enquiry above.

Since we have not seen an update, we will be closing this forum case from our end.

If you need any additional information, please submit a new question as this thread will no longer be monitored.

Regards,

Fikri_Intel