topic Re: RMM3 Remote management module in Intel® Xeon® Processor and Server Products https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/RMM3-Remote-management-module/m-p/200199#M385 <P>USB</P> Wed, 27 Apr 2011 00:58:05 GMT Edward_Z_Intel 2011-04-27T00:58:05Z RMM3 Remote management module https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/RMM3-Remote-management-module/m-p/200198#M384 <P>On the S5520UR board, does the RMM3 emulate a USB keyboard, or a PS2 keyboard?</P> Tue, 26 Apr 2011 23:08:44 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/RMM3-Remote-management-module/m-p/200198#M384 JTear 2011-04-26T23:08:44Z Re: RMM3 Remote management module https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/RMM3-Remote-management-module/m-p/200199#M385 <P>USB</P> Wed, 27 Apr 2011 00:58:05 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/RMM3-Remote-management-module/m-p/200199#M385 Edward_Z_Intel 2011-04-27T00:58:05Z Re: RMM3 Remote management module https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/RMM3-Remote-management-module/m-p/200200#M386 <P>Does it matter for some reason?</P><P></P><P>The RMM3 uses a USB interface to connect the RMM vitural Keyboard and Mouse.</P><P></P><P>If you look in BIOS set-up it reports the Keyboard &amp; Mouse there along with any local keyboards &amp; Mice.</P> Wed, 27 Apr 2011 06:15:59 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/RMM3-Remote-management-module/m-p/200200#M386 DSilv11 2011-04-27T06:15:59Z Re: RMM3 Remote management module https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/RMM3-Remote-management-module/m-p/200201#M387 <P>I wanted to install SCO Openserver 6.0.0 on this system <A href="http://www.intel.com/products/server/systems/sr2625ur/sr2625ur-overview.htm">http://www.intel.com/products/server/systems/sr2625ur/sr2625ur-overview.htm</A> <A href="http://www.intel.com/products/server/systems/sr2625ur/sr2625ur-overview.htm">http://www.intel.com/products/server/systems/sr2625ur/sr2625ur-overview.htm</A></P><P>The problem was that the installation routine requested input from the keyboard before loading the USB keyboard driver.</P><P>I resolved the issue by:</P><P>Building a simple desktop system with an IDE controller, 2gb of memory, a standard PS2 keyboard and mouse, and a PCI Express slot.</P><P>I installed the LSI RAID controller(LSI00178) in the PCI Express slot along with four 256gb SSD disks and a standard IDE cd-rom, as primary master.</P><P>I booted from the SCO boot disk (second cut) and loaded the megasas driver from the SCO maintenance pack 4 device driver cd.</P><P>When the installation was complete, I rebooted the system and installed maintenance pack 4, and most importantly installed OSS714 which is a fix for a USB 2.0 problem with systems having more that 4gb of memory, and the network driver package (nd) on the MP4 driver cd.</P><P>Finally I installed the RAID controller, and the SSD's into the SR2525UR chassis.</P><P>The onboard ethernet chip is not supported, so I substituted an Intel PRO1000MT.</P><P>All of the cd's used are available from SCO's web site.</P> Fri, 06 May 2011 13:59:29 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/RMM3-Remote-management-module/m-p/200201#M387 JTear 2011-05-06T13:59:29Z