https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Intel-RS2VB040-amp-Intel-RES2SV240/m-p/204010#M491 <P>I just try both of them and nothing happens. </P><P>And I flashed TFM FW v.103310 instead of v.103308.</P> Thu, 31 Jan 2013 20:17:23 GMT idata 2013-01-31T20:17:23Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Intel-RS2VB040-amp-Intel-RES2SV240/m-p/204006#M487 <P>Hello.</P><P></P><P>When I connect RS2VB040 (firmware: 12.12.0-0139) and RES2SV240 I receive an error:</P><P>F/W is in Fault State - MFI Register State 0xF0010000</P><P>Adapter at Baseport is not responding</P><P>No MegaRAID Adapter Installed.</P><P></P><P>Is this devices are compatible?</P><P></P><P>PS. When I connect RES2SV240 to Adaptec 5805 - all works perfectly.</P> Wed, 30 Jan 2013 12:38:26 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Intel-RS2VB040-amp-Intel-RES2SV240/m-p/204006#M487 idata 2013-01-30T12:38:26Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Intel-RS2VB040-amp-Intel-RES2SV240/m-p/204007#M488 <P>Alexander,</P><P></P><P>The RS2VB040 and RES2SV240 are compatible according to the RES2SV240 <A href="http://download.intel.com/support/motherboards/server/sb/res2sv240_thol_v70.pdf">http://download.intel.com/support/motherboards/server/sb/res2sv240_thol_v70.pdf</A> Intel® RAID Expander Card RES2SV240 tested hardware and operating system list.</P><P></P><P>Since the RES2SV240 and Adaptec* 5805 work fine, that would seem to point to the RS2VB040. The error you report looks to confirm this.</P><P></P><P>Does the RS2VB040 work correctly alone in the system? Have you tried other PCIe slots? Is the RS2VB040 validated with the system you are using it in? If so, I would attempt to flash the RS2VB040 again in case there is a firmware issue. If that doesn't resolve the issue, a RS2VB040 replacement looks to be in order.</P><P></P><P>Regards,</P><P>John</P> Thu, 31 Jan 2013 16:11:17 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Intel-RS2VB040-amp-Intel-RES2SV240/m-p/204007#M488 idata 2013-01-31T16:11:17Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Intel-RS2VB040-amp-Intel-RES2SV240/m-p/204008#M489 <P>Yes, RS2VB040 work correctly alone in the system. Now in my SuperMicro X8DTi-F motherboard works both of the RAID-contollers, RS2VB040 and Adaptec 5805. I already try RS2VB040 and RES2SV240 in different PCIe slots. I also try connect RS2VB040 in PCIe slot and RES2SV240 not in the slot, just connected to RS2VB040 and to the MOLEX connector.</P><P>Which version of RS2VB040 firmware better to flash again?</P> Thu, 31 Jan 2013 16:20:31 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Intel-RS2VB040-amp-Intel-RES2SV240/m-p/204008#M489 idata 2013-01-31T16:20:31Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Intel-RS2VB040-amp-Intel-RES2SV240/m-p/204009#M490 <P>You can either use the current 12.12.0-0139 version or try the previous 12.12.0-0124 version.</P><P></P><P>John</P> Thu, 31 Jan 2013 17:11:22 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Intel-RS2VB040-amp-Intel-RES2SV240/m-p/204009#M490 idata 2013-01-31T17:11:22Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Intel-RS2VB040-amp-Intel-RES2SV240/m-p/204010#M491 <P>I just try both of them and nothing happens. </P><P>And I flashed TFM FW v.103310 instead of v.103308.</P> Thu, 31 Jan 2013 20:17:23 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Intel-RS2VB040-amp-Intel-RES2SV240/m-p/204010#M491 idata 2013-01-31T20:17:23Z