topic Re: Server board S2600CW, after Enable in BIOS - Intel (R) Virtualization Tehnology not boot Windows Server 2012 R2 Standard! in Intel® Xeon® Processor and Server Products

Server board S2600CW, after Enable in BIOS - Intel (R) Virtualization Tehnology not boot Windows Server 2012 R2 Standard!

DDmit2 — Thu, 01 Sep 2016 12:39:08 GMT

Need help!

Re: Server board S2600CW, after Enable in BIOS - Intel (R) Virtualization Tehnology not boot Windows Server 2012 R2 Standard!

ttsoj — Thu, 01 Sep 2016 21:02:38 GMT

Does Windows boot if you disable Virtualization Technology?

What is on the picture you send that could help us help?

Re: Server board S2600CW, after Enable in BIOS - Intel (R) Virtualization Tehnology not boot Windows Server 2012 R2 Standard!

idata — Thu, 01 Sep 2016 22:46:55 GMT

Hello,

To answer your question, Windows should boot up just fine if Intel VT is enabled or disabled.

Re: Server board S2600CW, after Enable in BIOS - Intel (R) Virtualization Tehnology not boot Windows Server 2012 R2 Standard!

DDmit2 — Fri, 02 Sep 2016 05:36:57 GMT

Windows isn't boot if Disable Technology of Virtualization.

On the picture the moment is shown when Windows freezes.

Re: Server board S2600CW, after Enable in BIOS - Intel (R) Virtualization Tehnology not boot Windows Server 2012 R2 Standard!

DDmit2 — Fri, 02 Sep 2016 05:40:00 GMT

Windows not boot if Intel VT is enabled or disabled.

Windows now generally I ceased to boot, even from a setup disk!

Re: Server board S2600CW, after Enable in BIOS - Intel (R) Virtualization Tehnology not boot Windows Server 2012 R2 Standard!

DDmit2 — Fri, 02 Sep 2016 05:42:34 GMT

Windows 2008 R2 - is installed from an install disk normally. Problem only with Windows server 2012 R2!

Re: Server board S2600CW, after Enable in BIOS - Intel (R) Virtualization Tehnology not boot Windows Server 2012 R2 Standard!

idata — Mon, 05 Sep 2016 15:56:48 GMT

Hello,

We would like to inform you that enabling/disabling virtualization technology in the BIOS will not prevent the operating system to boot up. Here are our recommendations:

- Proceed to update the firmware on the server board to the latest version available:

https://downloadcenter.intel.com/download/26197/Intel-Server-Board-S2600CW-Firmware-Update-Package-for-Extensible-Firmware-Interface-EFI-?product=88278 Intel® Server Board S2600CW Firmware Update Package for Extensible Firmware Interface (EFI)

- Restore to defaults by going into the BIOS set up menu and pressing F9.

Test the system again and let us know the results.