https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343510#M6469 <P>What about the updates, and disabling Quiet Boot?</P> Tue, 02 Feb 2010 23:54:48 GMT Daniel_O_Intel 2010-02-02T23:54:48Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343505#M6464 <P>Hello experts.</P><P>&nbsp;</P>I found the following problem when I tried to exchange an HDD on the Embedded Server Raid:<P>&nbsp;</P>I'cannot access the CU pressing "Ctrl-E to run LSI Logic Embedded SATA RAID Setup Utility". As soon as I remove or exchange the HDD, which is a single disk running as RAID 0 on port 0, the server only boots to count/show all the drives, where it gets stuck with the message that the configuration changed...check cables...etc...<P>&nbsp;</P>Press any key to continue... and on the bottom of the screen: Press + to run...<P>&nbsp;</P>Neither "any key", nor "Ctrl-E" works. I tried 3 different keyboards PS2 and USB.<P>&nbsp;</P>If I put the original HDD back in, the server boots, but doesn't let me enter the CU either. Pressing Ctrl-E has no effect at all. Ctrl-A works to enter the SCSI CU, though.<P>&nbsp;</P>The company that sold us the server in April 2007 seems to be out of bussiness, since I can't reach them by phone, and their homepage is gone as well. I hope somebody here can advise me what to do.<P></P><P>TIA</P><P></P><P>Bernie</P><P></P><P>p.s. please excuse my English, it's not my native language.</P> Sat, 30 Jan 2010 08:30:58 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343505#M6464 idata 2010-01-30T08:30:58Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343506#M6465 <P>Which server board are you using?</P> Sun, 31 Jan 2010 06:48:31 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343506#M6465 Edward_Z_Intel 2010-01-31T06:48:31Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343507#M6466 <P>Intel Sapello S5000VSA</P> Mon, 01 Feb 2010 08:08:29 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343507#M6466 idata 2010-02-01T08:08:29Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343508#M6467 <P>If you use a different drive, will it let you into Ctrl-E? What if you use no HD at all?</P><P></P><P>If you haven't already, I recommend updating to latest BIOS/BMC/FRU, and disabling Quiet Boot in the BIOS</P> Mon, 01 Feb 2010 23:08:18 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343508#M6467 Daniel_O_Intel 2010-02-01T23:08:18Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343509#M6468 <P>I used No HD,diffrent HD, and old HD.</P><P>I also tried to take the old HD offline in the Web Console before removing it.</P><P>The only difference is, that with the old HD the server at least boots in to OS. Thanks god!</P> Tue, 02 Feb 2010 08:29:00 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343509#M6468 idata 2010-02-02T08:29:00Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343510#M6469 <P>What about the updates, and disabling Quiet Boot?</P> Tue, 02 Feb 2010 23:54:48 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343510#M6469 Daniel_O_Intel 2010-02-02T23:54:48Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343511#M6470 <P>I cannot do any updates before the weekend.</P> Wed, 03 Feb 2010 08:00:30 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/Cannot-enter-Embedded-RAID-CU/m-p/343511#M6470 idata 2010-02-03T08:00:30Z