https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/S3420GPLC-startproblem/m-p/404844#M9060 <P>hi@all,</P><P></P><P>Board: S3420GPLC</P><P>CPU: i3-530</P><P>RAM: 4*KVR1333D3E9S/2GI</P><P>PSU: bgt p6-pro 430w (ATX12V 2.2)</P><P></P><P>After Boot up nothing happen. Just LEDs blinking an Beeps after press Power On Button as long as 5 sec.</P><P></P><P>LSB</P><P>XOXXOOOO</P><P></P><P>In the Userguide &gt; 0xF2 O O O O X X O X Signal that the operating system has switched to virtual memory mode.</P><P></P><P>What could be the problem?</P><P>Is the PSU ATX12V ver to low?</P><P></P><P>Second: the PSU runs if I press the PSU switch on the back. Thats not normal.</P><P></P><P>As I read some things I should check:</P><P></P><P>- Board BIOS ver (higher 40?)</P><P></P><P>If it is to low where can I check it on the Board without start.</P><P></P><P>regards</P> Thu, 26 Jan 2012 07:08:28 GMT idata 2012-01-26T07:08:28Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/S3420GPLC-startproblem/m-p/404844#M9060 <P>hi@all,</P><P></P><P>Board: S3420GPLC</P><P>CPU: i3-530</P><P>RAM: 4*KVR1333D3E9S/2GI</P><P>PSU: bgt p6-pro 430w (ATX12V 2.2)</P><P></P><P>After Boot up nothing happen. Just LEDs blinking an Beeps after press Power On Button as long as 5 sec.</P><P></P><P>LSB</P><P>XOXXOOOO</P><P></P><P>In the Userguide &gt; 0xF2 O O O O X X O X Signal that the operating system has switched to virtual memory mode.</P><P></P><P>What could be the problem?</P><P>Is the PSU ATX12V ver to low?</P><P></P><P>Second: the PSU runs if I press the PSU switch on the back. Thats not normal.</P><P></P><P>As I read some things I should check:</P><P></P><P>- Board BIOS ver (higher 40?)</P><P></P><P>If it is to low where can I check it on the Board without start.</P><P></P><P>regards</P> Thu, 26 Jan 2012 07:08:28 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/S3420GPLC-startproblem/m-p/404844#M9060 idata 2012-01-26T07:08:28Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/S3420GPLC-startproblem/m-p/404845#M9061 <P>The good news is, the BIOS version on this board will never prevent booting. Even an old BIOS will still get you video, and messages.</P><P></P><P>Each 12V rail needs a maximum of 16A - what does your power supply provide?</P> Sat, 28 Jan 2012 01:03:43 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/S3420GPLC-startproblem/m-p/404845#M9061 Daniel_O_Intel 2012-01-28T01:03:43Z https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/S3420GPLC-startproblem/m-p/404846#M9062 <P>See if it's related to this one: <A href="http://www.intel.com/support/motherboards/server/sb/CS-031225.htm">http://www.intel.com/support/motherboards/server/sb/CS-031225.htm</A> TA-943: Board may not boot with certain processors or <A href="http://www.intel.com/support/motherboards/server/sb/CS-031713.htm">http://www.intel.com/support/motherboards/server/sb/CS-031713.htm</A> BIOS 42 or later required to boot certain processors</P> Sun, 29 Jan 2012 02:56:45 GMT https://community.intel.com/t5/Intel-Xeon-Processor-and-Server/S3420GPLC-startproblem/m-p/404846#M9062 Edward_Z_Intel 2012-01-29T02:56:45Z