Sony LCD TV Modelines

plebster — Sun, 07 Oct 2007 18:31:22 GMT

Hi,

I'm really struggling to set up the modeline on my ubuntu mythtv fronted for my Sony KDL32V2500 lcd TV. I have tried numerous setting and have had no joy. I have feisty fawn installed on an old Toshiba A2 laptop which has an Intel 855GM integrated graphics card. I have installed 915 resolution drivers but still no mater what I only get 1024 x 768!!

Here is my xorg.conf, as you can see tried loads of different modelines:

Section "Device"
	Identifier	"Intel Corporation 82852/855GM Integrated Graphics Device"
	Driver		"i810"
	BusID		"PCI:0:2:0"
EndSection

Section "Monitor"
         Identifier "SonyBravia"
         HorizSync 47.7
         VertRefresh 84.72
         #ModeLine "1360x768" 171.200 1360 1430 1542 1792 768 771 777 795 +hsync +vsync
         #ModeLine "1360x768" 85.500 1360 1424 1536 1792 768 771 777 795 +Hsync +Vsync
         #ModeLine "1360x768" 85.500 1360 1430 1542 1792 768 771 777 795 +hsync +vsync
         #ModeLine "1280x768" 79.500 1280 1350 1478 1664 768 771 778 798 -hsync +vsync
         Modeline "1360x768_60.00"  84.72  1360 1424 1568 1776  768 769 772 795 -Hsync +Vsync
EndSection

I have connected my XP laptop to the screen and managed to get the native resolution of 1360 x768. Whilst in Windows I have run MonInfo the details are:

Monitor
  Windows description......... Sony Monitor
  Manufacturer description.... SONY TV
  Manufacturer................ Sony
  ----------------------------
  Plug and Play ID............ SNYA500
  Serial number............... n/a
  EDID data source............ I2C bus (real-time)
  ----------------------------
  Manufacture date............ 2005, ISO week 42
  EDID revision............... 1.3
  Display type and signal..... Analog 0.700,0.300 (1.0V p-p)
  Sync input support.......... Separate
  Screen size................. n/a
  Power management............ n/a

Color characteristics
  Display gamma............... 2.20
  Red chromaticity............ Rx 0.645 - Ry 0.335
  Green chromaticity.......... Gx 0.265 - Gy 0.585
  Blue chromaticity........... Bx 0.140 - By 0.065
  White point (default)....... Wx 0.282 - Wy 0.284

Timing characteristics
  VESA GTF support............ Not supported
  Horizontal scan range....... 30-49kHz
  Vertical scan range......... 57-63Hz
  Video bandwidth............. 90MHz
  Extension blocks............ n/a
  Timing recommendation #1.... 1360x768 at 60Hz
      Modeline................ "1360x768" 85.500 1360 1430 1542 1792 768 771 777 795 +hsync +vsync
  Timing recommendation #2.... 1280x768 at 60Hz
      Modeline................ "1280x768" 79.500 1280 1350 1478 1664 768 771 778 798 -hsync +vsync

Standard timings supported
   640 x  480 at  60Hz - IBM VGA
   640 x  480 at  60Hz - VESA
   720 x  400 at  70Hz - IBM VGA
   800 x  600 at  60Hz - VESA
  1024 x  768 at  60Hz - VESA
  1280 x  768 at  60Hz - Sony
  1360 x  768 at  60Hz - Sony

Raw EDID base
  00: 00 FF FF FF FF FF FF 00  4D D9 00 A5 01 01 01 01 
  10: 2A 0F 01 03 08 00 00 78  0A 3F F7 A5 55 43 95 23 
  20: 10 48 48 A1 08 00 31 40  45 40 61 40 01 01 01 01 
  30: 01 01 01 01 01 01 66 21  50 B0 51 00 1B 30 46 70 
  40: 36 00 00 00 00 00 00 1E  0E 1F 00 80 51 00 1E 30 
  50: 46 80 37 00 00 00 00 00  00 1C 00 00 00 FD 00 39 
  60: 3
F 1E 31 09 00 0A 20 20  20 20 20 20 00 00 00 FC 
  70: 00 53 4F 4E 59 20 54 56  0A 20 20 20 20 20 00 79 

Display adapter
  Adapter description......... Auxiliary port
  Adapter device ID........... 0x27A68086
  Display settings............ n/a

User/computer information
  Registered user name........ 
  Registered organization..... n/a
  Network user name........... Jim
  Network computer name....... LAPDOG-SMURF
  Windows version ............ Windows XP
  Windows build .............. 5.01.2600 Service Pack 2
  Installation date .......... 5/1/2007 12:00:00 PM

and powerstrip gave the following:

PowerStrip timing parameters:
1360x768=1360,70,112,250,768,3,6,18,171200,512

Generic timing details for 1360x768:
HFP=70 HSW=112 HBP=250 kHz=96 VFP=3 VSW=6 VBP=18 Hz=120

VESA detailed timing:
PClk=171.20 H.Active=1360 H.Blank=432 H.Offset=54 HSW=112 V.Active=768 V.Blank=27 V.Offset=3 VSW=6

Linux modeline parameters:
"1360x768" 171.200 1360 1430 1542 1792 768 771 777 795 +hsync +vsync

Any help would be greatly appreciated!!

Cheers,

Jim

Re: Sony LCD TV Modelines

Aaron_B_Intel — Mon, 08 Oct 2007 03:03:49 GMT

Have you taken your question to

http://lists.freedesktop.org/mailman/listinfo/xorg

They're mostly involved in the development of the Intel drivers for Linux, but they've helped the occasional person who had questions on how to get his resolution running.

Just from what I see of your Monitor section... shouldn't HorizSyncand Vertical Refresh be a range and not a single number? Been a while since I looked at my xorg.conf, so I could be wrong. Also, it's reporting the i810 driver... I'd jump to the new Intel drivers get started there.

Re: Sony LCD TV Modelines

plebster — Mon, 08 Oct 2007 09:42:45 GMT

Archibael,

I have tried a range of numbers and statics numbers for HorizSync and Vertical refresh ranges. With no luck!!

I've subsribed to the mailing list, we'll see what that turns up.

Thanks,

Jim

topic Re: Sony LCD TV Modelines in Software Archive

Sony LCD TV Modelines

Re: Sony LCD TV Modelines

Re: Sony LCD TV Modelines