SMbus Driver IO Controls

billp122 — Thu, 14 Jul 2005 22:29:50 GMT

Hi,

Intel Supplies an SMBus Driver with their Active Monitor Program. The Active Monitor Program, nor any other program that I have found,unfortunatly does not provide the solution to the problem that I have which is to monitor fans and temperatures on 300+ systems in a production facility.

So I was wondering is there anyway to get information onthe I/O control commands into this driver so I can write my own application that will pass the data I need to a central database?

Thanks

Bill

Re: SMbus Driver IO Controls

Intel_Software_Netw1 — Sat, 16 Jul 2005 04:43:38 GMT

Greetings from Intel Software Network Support.

Any publicly available information of this type will typically be posted to the Intel Hardware Design web site at www.intel.com/design. It is possible that some or all of the information you are seeking is confidential and only available under a Non-Disclosure Agreement. If the information you are looking for is not on the public site,wewould recommend contacting your Intel Product Representative for this information. Please ask to speak with a Field Application Engineer (FAE). If your company does not already have a contact via your purchasing department, please see the following URL: http://www.intel.com/buy/networking/design.htmunder "Design Help"

If your location is not listed, pleasecontact an Intel Authorized Distributor (linked from the same URL).

Regards,

Lexi S.

Intel Software Network Support

http://www.intel.com/software/

Message Edited by intel.software.network.support on 11-15-2005 11:53 PM

topic SMbus Driver IO Controls in Software Archive

SMbus Driver IO Controls

Re: SMbus Driver IO Controls