topic Hi, in Software Archive

Gesture Recognition

PowerMan_T_ — Mon, 09 Feb 2015 22:45:46 GMT

Hi Guys,

Is there a difference in coding the dynamic gestures vs. static. I set EnableAllGesture(). The "swipe" "wave" gestures are not being recognized. All the other gestures work fine.

I didn't see anything specified in the reference manual

Thanks

Be sure to use the wave and

Colleen_C_Intel — Mon, 09 Feb 2015 22:54:55 GMT

Be sure to use the wave and swipes as defined in the SDK (see UX guide). In R1, Swipes are called from the Touchless Controller. Wave and swipe shouldn't be used at the same time (easily confused). Best to only enable the gestures you will use and not use enable all except for testing.

Hi,

HexLord — Tue, 10 Feb 2015 11:29:43 GMT

Hi,

I enabled the swipe gesture but it always detects two swipe gestures at once.

Is there a way to slow it down?

Thanks,

Shaleen

You can do it yourself using

Carles_V_ — Tue, 10 Feb 2015 14:21:51 GMT

You can do it yourself using a timer.

Is it detecting left and

Colleen_C_Intel — Tue, 10 Feb 2015 18:33:24 GMT

Is it detecting left and right together or two of the same direction?

The swipe is more a slow waving of the fingers (from pointing at the camera to pointing to the middle of the body area.