https://community.intel.com/t5/Software-Archive/Flash-Edison-over-I2C/m-p/1026395#M40248 <P>Assume I have two Edisons connected over I2C with each other.</P><P>With many of the newer PIC microcontrollers it's possible to flash the chip over I2C. For those wondering what I'm talking about, read for example AN1302 from Microchip. Basically part of the flash is reserved by the bootloader and the bootloader puts the firmware received over I2C in the rest of the memory.</P><P>1. Does the Edison bootloader support such operations?</P><P>2. If not, is it doable to modify the bootloader into allowing such operations?</P><P>&nbsp;</P> Wed, 15 Apr 2015 09:05:39 GMT K_R_1 2015-04-15T09:05:39Z https://community.intel.com/t5/Software-Archive/Flash-Edison-over-I2C/m-p/1026395#M40248 <P>Assume I have two Edisons connected over I2C with each other.</P><P>With many of the newer PIC microcontrollers it's possible to flash the chip over I2C. For those wondering what I'm talking about, read for example AN1302 from Microchip. Basically part of the flash is reserved by the bootloader and the bootloader puts the firmware received over I2C in the rest of the memory.</P><P>1. Does the Edison bootloader support such operations?</P><P>2. If not, is it doable to modify the bootloader into allowing such operations?</P><P>&nbsp;</P> Wed, 15 Apr 2015 09:05:39 GMT https://community.intel.com/t5/Software-Archive/Flash-Edison-over-I2C/m-p/1026395#M40248 K_R_1 2015-04-15T09:05:39Z https://community.intel.com/t5/Software-Archive/Flash-Edison-over-I2C/m-p/1026396#M40249 <P>Don't have an answer just a note in case you haven't seen:&nbsp;<SPAN style="font-size: 1em; line-height: 1.5;">you can check out the EDK sources for the bootloader</SPAN></P> Fri, 17 Apr 2015 08:39:18 GMT https://community.intel.com/t5/Software-Archive/Flash-Edison-over-I2C/m-p/1026396#M40249 Matthias_H_Intel 2015-04-17T08:39:18Z