topic Hi Gerardo, in Software Archive

It is possible to modify the Scanning area (R200)

Gerardo_M_ — Thu, 17 Sep 2015 20:19:34 GMT

Hello, I have been using the F200 camera since several months ago, now I got a R200 camera, however I found that the Scanning area in both cameras are quite different. I want to know if it is possible to modify the Scanning area variables type, width, height, etc. I'm using R200 with the 3D scan example developed in C#.

Thanks

If you mean the region of

samontab — Fri, 18 Sep 2015 00:17:59 GMT

If you mean the region of space that you see in each camera, then, no. That is determined by the sensor size and the lens focal length, both of which you can't really change in these cameras.

Actually I'm talking about

Gerardo_M_ — Mon, 21 Sep 2015 14:24:17 GMT

Actually I'm talking about the 3D cube that the camera virtually makes during the Scanning process. For example, when I scan a Head I have a virtual cube that the camera makes to capture the imagine, my understanding is that the camera has the following parameters (just an example):

width: X

Height : Y

Depth : Z

Distance: 1mt.

It is possible for me to change those values to another ones that better fits my needs, for example:

width: X-A

Height : Y-A

Depth : Z-A

Distance: 0.5 mt.

Where A is a value I can enter.

Thanks

Hi Gerardo,

samontab — Tue, 22 Sep 2015 02:49:46 GMT

Hi Gerardo,

Yes,

You can actually change those values in the R200. Have a look here:

https://software.intel.com/sites/landingpage/realsense/camera-sdk/v1.1/documentation/html/index.html?member_functions_r200_device_pxccapture.html

Have the available functions

jb455 — Tue, 17 Nov 2015 16:37:55 GMT

Have the available functions changed? None of those on the link seem to be able to modify the scanning volume, unless I'm missing something..