topic There was a problem with the in Software Archive

Issue with APP ID on Windows build x Windows Store

Hamilton_Tenório_da_ — Wed, 25 Mar 2015 15:08:52 GMT

I am trying to publish an APP to Windows Store. The name of APP is ConfirmAkiPRO.

When I use only this name on building settings, the Windows Store does not accept my package. The error is:

Validation error: All packages for this app must use the package identity name: 9HTSInformtica.ConfirmAkiPRO

If I change the ID name to this, the build starts OK:

Build Log:

Building a Cordova 4.1.2 application.
The application name is ConfirmAki PRO
The package name is 9HTSInformtica.ConfirmAkiPRO

...
but does not finish. In the log appears this line:

...\ConfirmAkiPRO\platforms\windows\build\windows80\Release\AnyCPU\AppxManifest.xml(24,18): error APPX1404: File content does not conform to specified schema. The 'Id' attribute is invalid - The value '9HTSInformtica.ConfirmAkiPRO' is invalid according to its datatype

I´m lost.... It is my first APP in Windows Store. Maybe I´m doing somehing wrong.

Your information looks valid.

Eric_H_Intel — Thu, 26 Mar 2015 05:22:57 GMT

Your information looks valid. I'll take a look and figure out what is going wrong with the build.

Eric

Cordova 4.1.2 for Windows

Eric_H_Intel — Thu, 26 Mar 2015 05:57:29 GMT

Cordova 4.1.2 for Windows updates two fields in the appxmanifest file with the package name. Unfortunately the fields have different specifications. The one that is causing the error in your build does not allow the period "." character.

I have put a short term fix in place. Try your build again and it should get past that problem.

Eric

Great job! Thank you. It

Hamilton_Tenório_da_ — Thu, 26 Mar 2015 12:03:53 GMT

Great job! Thank you. It works good now. Microsoft accept now my APP.

I got the same issue

Dustin_S_ — Sat, 16 May 2015 13:32:32 GMT

I got the same issue

Hi,

Anthony_P_1 — Fri, 29 May 2015 14:49:00 GMT

Hi,

I also have this issue with Cordova 4.1.2 for Windows

error APPX1404: File content does not conform to specified schema. The 'Id' attribute is invalid - 
The value '270899gig.GreatRiverRaceTracker' is invalid according to its datatype 
'http://schemas.microsoft.com/appx/2010/manifest:ST_ApplicationId' - 
The Pattern constraint failed.

Is there a fix on the way?

Thanks

I contacted the build

PaulF_IntelCorp — Fri, 29 May 2015 16:38:04 GMT

I contacted the build engineer and he implemented another fix that should address the issue. Please try your builds again and report success or failure on this thread.

Hi Paul,

Anthony_P_1 — Tue, 02 Jun 2015 08:05:08 GMT

Hi Paul,

Thanks and yes that seems to have worked, I have first done a build using the files on the server, which completed successfully, and then I did another build with a fresh upload of the code which also completed successfully.

Am now off to test the appxupload file!

There was a problem with the

PaulF_IntelCorp — Thu, 18 Jun 2015 22:52:50 GMT

There was a problem with the server regarding that issue, it has been fixed.

But it also looks like your App ID is not valid. Are you using "18f21439-6d3a-4cf7-a31c-25dda7998ca4" as your "App ID" field? That looks more like a store publishing ID, or something similar. Your App ID is not provided by Microsoft or the store, you choose that. For example "my.app.id" or "fr.my.domain.my.app.id" or whatever you want, so long as nobody else and no other app is using it.

Sorry, don't speak French.

I am trying to create cordova

Gopal_V_ — Fri, 31 Jul 2015 04:50:00 GMT

I am trying to create cordova 4.1.2 build for windows phone and It is failing with the following log: The value '67A35FAF.APPRECApp' is invalid according to its datatype 'http://schemas.microsoft.com/appx/2010/manifest:ST_ApplicationId' - The Pattern constraint failed. [...\APPRECApp\platforms\windows\CordovaApp.Windows80.jsproj] Can you please let me know what could be an error in this. Thanks a lot

The Cordova Windows Phone

John_H_Intel2 — Fri, 31 Jul 2015 12:56:42 GMT

The Cordova Windows Phone build has not been released by the XDK team. Are you trying to build a legacy build for Windows Phone or something else?

Hi JOHN,

Gopal_V_ — Mon, 03 Aug 2015 08:08:45 GMT

Hi JOHN,

Thanks for your reply. I am using "Cordova Hybrid Mobile App Platform". Please find the screen shot attached.

Regards,

Gopal V

Normally, that build tile

PaulF_IntelCorp — Tue, 04 Aug 2015 00:25:12 GMT

Normally, that build tile creates a Windows Store app, However, there now is an experimental way to build a Windows Phone 8 app using that tile. Please follow the instructions here: https://software.intel.com/en-us/forums/topic/563699

Hi there,

sean_v_3 — Tue, 04 Aug 2015 11:30:00 GMT

Hi there,

I appear to be having the same issue.

File content does not conform to specified schema. The 'Id' attribute is invalid - 
The value '1234MyName.MyTestA1B2' is invalid according to its datatype
 'http://schemas.microsoft.com/appx/2010/manifest:ST_ApplicationId' - 
The Pattern constraint failed

I changed my ID above sine it includes my name, but the format is the same including caps and the "." in the middle.

Any chance of a quick fix? I've got a meeting with a prospect and I'd like to show them a demo tomorrow. I'd do it with the App Preview, but with some of the recent depreciations I need to use Cordova plugins and that means building the app (AFAIK, maybe I'm wrong on that?).

Thanks!

I've asked the build

PaulF_IntelCorp — Tue, 04 Aug 2015 19:13:40 GMT

I've asked the build engineers to take a look at this problem. It is a problem in our build, not in your app (due to a problem in Cordova) and our build system should have a fix for it. The fix described in the Stack Overflow link I reference will not work with our build system.

The build engineers inform me

PaulF_IntelCorp — Tue, 04 Aug 2015 19:40:19 GMT

The build engineers inform me the issue has been resolved. Your builds should now generate apps that can be submitted to the store.

Hello, i have a similar

Ionut_P_ — Thu, 06 Aug 2015 17:46:06 GMT

Hello, i have a similar problem, in the build log i get :

\SaveRosiaMontana-TheGame\platforms\windows\build\windows80\release\anycpu\AppxManifest.xml(32,18): error APPX1404: File content does not conform to specified schema. The 'Id' attribute is invalid - The value '17755SyntaxNova.SaveRosiaMontanaTheGame' is invalid according to its datatype 'http://schemas.microsoft.com/appx/2010/manifest:ST_ApplicationId' - The Pattern constraint failed. [...\SaveRosiaMontana-TheGame\platforms\windows\CordovaApp.Windows80.jsproj]

When i delete the numbers from the front of the id it works, but in Windows Developer Console i get :

Invalid package identity name: SyntaxNova.SaveRosiaMontanaTheGame (expected: 17755SyntaxNova.SaveRosiaMontanaTheGame)

Also http://schemas.microsoft.com/appx/2010/manifest:ST_ApplicationId says "The resource you are looking for has been removed, had its name changed, or is temporarily unavailable" ...

Thanks in advance !

any one here ?

Ionut_P_ — Tue, 11 Aug 2015 15:22:16 GMT

any one here ?

@Ionut -- can you attach a

PaulF_IntelCorp — Tue, 11 Aug 2015 18:29:08 GMT

@Ionut -- can you attach a ZIPped file of a simple example that results in this build error? I am not able to reproduce the problem. Create a sample based on the blank cordova template and set the build settings like your project, then ZIP the entire project directory and attach it to a post on this thread so I can see if I can reproduce the issue. Fill out the build settings like you would for the problem project.

It works with a new build ...

Ionut_P_ — Tue, 11 Aug 2015 20:40:00 GMT

It works with a new project ... i'm baffled. I'll review the build details of the other app and post my result.

Thank you for your time.