https://community.intel.com/t5/Software-Archive/f200-realsense-camera/m-p/1061848#M54435 <P>&nbsp;</P> <P>All the hardware requirements have met.</P> <OL> <LI>Os- Windows 10</LI> <LI>Processor i5-4210</LI> </OL> <P>&nbsp;I have installed the dcm and the sdk.&nbsp;In the device manager, under imaging devices all the three are shown(virtual driver, depth , rgb f200 ).</P> <P>The camera explorer detects the device and both color and depth stream are enabled, but it results in a device malfunction error on starting the 3D viewer for the camera. I am also not able to run the sample programs on sdk. Once in a while, on restarting, only one&nbsp;sdk&nbsp;sample program can be run but after that, the camera gets disconnected and fails to run other sdk sample programs.</P> <P>Hope someone can help me resolve this problem.</P> Sat, 14 May 2016 08:16:39 GMT neha_g_ 2016-05-14T08:16:39Z https://community.intel.com/t5/Software-Archive/f200-realsense-camera/m-p/1061848#M54435 <P>&nbsp;</P> <P>All the hardware requirements have met.</P> <OL> <LI>Os- Windows 10</LI> <LI>Processor i5-4210</LI> </OL> <P>&nbsp;I have installed the dcm and the sdk.&nbsp;In the device manager, under imaging devices all the three are shown(virtual driver, depth , rgb f200 ).</P> <P>The camera explorer detects the device and both color and depth stream are enabled, but it results in a device malfunction error on starting the 3D viewer for the camera. I am also not able to run the sample programs on sdk. Once in a while, on restarting, only one&nbsp;sdk&nbsp;sample program can be run but after that, the camera gets disconnected and fails to run other sdk sample programs.</P> <P>Hope someone can help me resolve this problem.</P> Sat, 14 May 2016 08:16:39 GMT https://community.intel.com/t5/Software-Archive/f200-realsense-camera/m-p/1061848#M54435 neha_g_ 2016-05-14T08:16:39Z