amplxe: Error: Cannot find product on the target system at mic0

ye_f_1 — Fri, 08 Apr 2016 03:32:24 GMT

Hi,
I want to use vtune on phi in native mode.But when I run the command,I get following information.

wj@mcc21:~/mic_test$ amplxe-cl -r ./ -target-system=mic-native:0 -collect advanced-hotspots /home/wj/a
amplxe: Using target: mic-native:0
amplxe: Error: Cannot find product on the target system at mic0:/amplxe/vtune_amplifier_xe_2016.2.0.444464/
VTune Amplifier was not properly installed on the Xeon Phi card. To make installation please run under the following commands under root or sudo:
><VTune_install_dir_on_the_host>/bin64/k1om/micboot_install.sh
>service mpss restart
amplxe: Error: Amplifier cannot detect Intel Xeon Phi coprocessor configuration.
amplxe: Error: Cannot find product on the target system at mic0:/amplxe/vtune_amplifier_xe_2016.2.0.444464/
VTune Amplifier was not properly installed on the Xeon Phi card. To make installation please run under the following commands under root or sudo:
><VTune_install_dir_on_the_host>/bin64/k1om/micboot_install.sh
>service mpss restart
amplxe: Error: Amplifier cannot detect Intel Xeon Phi coprocessor configuration.

   Then I execute following command.
   ./sep_micboot_install.sh
   service mpss restart

I find the driver have installed on phi.

wj@mcc21:~/mic_test$ ssh mic0 lsmod | grep sep3
sep3_15 45433 2

But when I run the command "amplxe-cl -r ./ -target-system=mic-native:0 -collect advanced-hotspots /home/wj/a",I get the same output.

wj@mcc21:~/mic_test$ amplxe-cl -r ./ -target-system=mic-native:0 -collect advanced-hotspots /home/wj/a
amplxe: Using target: mic-native:0
amplxe: Error: Cannot find product on the target system at mic0:/amplxe/vtune_amplifier_xe_2016.2.0.444464/
VTune Amplifier was not properly installed on the Xeon Phi card. To make installation please run under the following commands under root or sudo:
><VTune_install_dir_on_the_host>/bin64/k1om/micboot_install.sh
>service mpss restart
amplxe: Error: Amplifier cannot detect Intel Xeon Phi coprocessor configuration.
amplxe: Error: Cannot find product on the target system at mic0:/amplxe/vtune_amplifier_xe_2016.2.0.444464/
VTune Amplifier was not properly installed on the Xeon Phi card. To make installation please run under the following commands under root or sudo:
><VTune_install_dir_on_the_host>/bin64/k1om/micboot_install.sh
>service mpss restart
amplxe: Error: Amplifier cannot detect Intel Xeon Phi coprocessor configuration.

what's wrong ?

OK,I solve the problem.I run

ye_f_1 — Fri, 08 Apr 2016 05:52:00 GMT

OK,I solve the problem.I run the sep_micboot_uninstall.sh and sep_micboot_create.sh,it generates micboot_install.sh.

Software Archive 中的主題 OK,I solve the problem.I run

amplxe: Error: Cannot find product on the target system at mic0

OK,I solve the problem.I run