miccheck failed

ramy_a_ — Sun, 24 Apr 2016 00:07:24 GMT

Hi,

I performed the miccheck command on a node which has two Xeon phi

Here is the output:

MicCheck 3.6.1-r1
Copyright (c) 2015, Intel Corporation.

Executing default tests for host
Test 0: Check number of devices the OS sees in the system ... pass
Test 1: Check mic driver is loaded ... pass
Test 2: Check number of devices driver sees in the system ... pass
Test 3: Check mpssd daemon is running ... pass
Executing default tests for device: 0
Test 4 (mic0): Check device is in online state and its postcode is FF ... pass
Test 5 (mic0): Check ras daemon is available in device ... pass
Test 6 (mic0): Check running flash version is correct ... fail
device flash version does not match, should be '391', it is '386'.
Executing default tests for device: 1
Test 7 (mic1): Check device is in online state and its postcode is FF ... pass
Test 8 (mic1): Check ras daemon is available in device ... pass
Test 9 (mic1): Check running flash version is correct ... fail
device flash version does not match, should be '391', it is '386'.

Status: FAIL
Failure: A device test failed

I need to know how to fix this issue.

If I need to update the flash version, pleae,can anyone provide me with procedures to do so?

Thanks for your help.

Regards,

Ramy

most likely you've just

JJK — Sun, 24 Apr 2016 20:50:08 GMT

most likely you've just upgraded your MPSS version and did not upgrade the flash on the Phi's. Try running

micflash -update -device all

to see if that solves it.

topic miccheck failed in Software Archive

miccheck failed

most likely you've just