Have a beeping problem with new ram memory.

pinger_d_ — Sun, 30 Mar 2014 20:19:12 GMT

i think its about performance of computer.

Have a beeping problem with new ram memory - 4gb.

beeping , and no display.

Mother board: https://www-ssl.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dg41wv.html

According to this, my destop board could accept memory stick, but pratically not.

Ram sticks : http://www.kingston.com/dataSheets/KVR13n9s8_4.pdf

I have two of these rams and both news. I dont think they are broken.

I just put one in A place , not two in A and B place , because in information was written max - 4gb.

Now pc working with 2x1gb ram sticks. 1333 Mhz Memory default (5-5-5-15)

Any suggestions,questions or solutions of problem?

Someone has write that:

"And you are right, it supports DDR3-1066/800 - not 1333

It was just a pure chance that your 1 GB 1333 MHz modules worked - sometimes higher frequency RAM will downclock and run - that does not mean that all 2 GB 1333 MHz should work. This is why you are hearing the beep and having other problems.

Please change over to either 1033 or 800 MHz RAM per Intel board specs. Then you can use 2 x 2 GB modules for a total of 4 GBs.""

It can be or not? Please help. :)

Link of system information :

pinger_d_ — Sun, 30 Mar 2014 20:23:27 GMT

Link of system information : http://www.part.lt/img/dc78ed4d21b6073271dff9d7a7ab5c9f373.jpg

Hi pinger

Bernard — Mon, 31 Mar 2014 06:05:53 GMT

Hi pinger

This is not proper forum for your question.You should ask this question on motherboard manufacturer forum.

could you send link where

pinger_d_ — Mon, 31 Mar 2014 12:48:24 GMT

could you send link where should be this topic?

Try this forum:

Bernard — Mon, 31 Mar 2014 13:22:20 GMT

Try this forum:

https://communities.intel.com/community/tech/desktop

topic Try this forum: in Software Tuning, Performance Optimization & Platform Monitoring

Have a beeping problem with new ram memory.

Link of system information :

Hi pinger

could you send link where

Try this forum: