topic Re: how to Setup Enterprise mode in Intel vPro® Platform

how to Setup Enterprise mode

idata — Thu, 21 Feb 2008 11:55:49 GMT

I had try to setup enterprise mode of Vpro by HP 6910P 2 PCS.

SW: Intel_vPro_cPro_Demo

Refer document is amt_provisioning.pdf

Q: we can find the AMT machine, but we can't connect the machine. Neither Intel DTK nor http.

Any expert can give me some step by step procedure, sincerely thanks ?

Re: how to Setup Enterprise mode

idata — Thu, 21 Feb 2008 23:42:03 GMT

I've got a couple of questions for you. Are you using AMT Director or another ISV to provision your clients? Are you using TLS or non-TLS based security?

Re: how to Setup Enterprise mode

idata — Fri, 22 Feb 2008 03:28:36 GMT

Are you using AMT Director or another ISV to provision your clients?

Intel AMT Director, has try ISV HP OpenView can't find the AMT machine.

Are you using TLS or non-TLS based security?

TLS security, PID and PPS

Re: how to Setup Enterprise mode

idata — Tue, 26 Feb 2008 19:52:11 GMT

TLS security, PID and PPS

Do you have a CA configured and did you add the root certificate to AMT Director?

You may want to try creating a non-TLS profile and try provisioning a client with it. If that works ok you will want to verify your CA is working properly and that you have root certificate loaded in AMT Director so that it can properly provision your client.

Re: how to Setup Enterprise mode

idata — Wed, 27 Feb 2008 03:41:39 GMT

Thank you for your message, this issue were fixed.