https://community.intel.com/t5/Intel-vPro-Platform/Cannot-get-Remote-Windows-Management-to-work/m-p/202528#M188 <P>I have multiple machines on my network, all running AMT version 3.2.3.</P><P></P><P>Using the Manageability Commander Tool, I can remotely take control of my machines. I know the SOL works fine as I can redirect my machines to boot from an image, reboot into BIOS, power down, etc. My question is that when my machines are powered up to the OS (WinXP), I cannot get any of the Serial Agent commands to work. When I try to open Device Manager, File Explorer, Watchdogs, etc. the window opens, but I do not get any information on them no matter how much I refresh the status or wait.</P><P></P><P>I do know they work as I have seen them work previously, but I do not know what has caused it to stop.</P><P></P><P>Any help would be appreciated.</P><P></P><P>Thanks.</P> Fri, 01 May 2009 00:54:38 GMT idata 2009-05-01T00:54:38Z https://community.intel.com/t5/Intel-vPro-Platform/Cannot-get-Remote-Windows-Management-to-work/m-p/202528#M188 <P>I have multiple machines on my network, all running AMT version 3.2.3.</P><P></P><P>Using the Manageability Commander Tool, I can remotely take control of my machines. I know the SOL works fine as I can redirect my machines to boot from an image, reboot into BIOS, power down, etc. My question is that when my machines are powered up to the OS (WinXP), I cannot get any of the Serial Agent commands to work. When I try to open Device Manager, File Explorer, Watchdogs, etc. the window opens, but I do not get any information on them no matter how much I refresh the status or wait.</P><P></P><P>I do know they work as I have seen them work previously, but I do not know what has caused it to stop.</P><P></P><P>Any help would be appreciated.</P><P></P><P>Thanks.</P> Fri, 01 May 2009 00:54:38 GMT https://community.intel.com/t5/Intel-vPro-Platform/Cannot-get-Remote-Windows-Management-to-work/m-p/202528#M188 idata 2009-05-01T00:54:38Z