https://community.intel.com/t5/Wireless/Network-with-the-same-SSID/m-p/280298#M3971 <P>Yes, but in WDS you can use AP on the same channel. Client change AP only when signal from actual AP is lost? </P> Thu, 10 Nov 2011 08:47:55 GMT idata 2011-11-10T08:47:55Z https://community.intel.com/t5/Wireless/Network-with-the-same-SSID/m-p/280296#M3969 <P>How manually connect to other AP in network with the same SSID? </P> Wed, 09 Nov 2011 13:34:50 GMT https://community.intel.com/t5/Wireless/Network-with-the-same-SSID/m-p/280296#M3969 idata 2011-11-09T13:34:50Z https://community.intel.com/t5/Wireless/Network-with-the-same-SSID/m-p/280297#M3970 <P>In my experience, you cannot manually select which AP you connect to as your wireless card automatically selects the best one. However, your two APs broadcasting the same SSID must be on different channels in order for this to work correctly. If you set both on the same channel, your wireless card will be "confused" as to which AP to associate.</P> Thu, 10 Nov 2011 03:43:06 GMT https://community.intel.com/t5/Wireless/Network-with-the-same-SSID/m-p/280297#M3970 idata 2011-11-10T03:43:06Z https://community.intel.com/t5/Wireless/Network-with-the-same-SSID/m-p/280298#M3971 <P>Yes, but in WDS you can use AP on the same channel. Client change AP only when signal from actual AP is lost? </P> Thu, 10 Nov 2011 08:47:55 GMT https://community.intel.com/t5/Wireless/Network-with-the-same-SSID/m-p/280298#M3971 idata 2011-11-10T08:47:55Z