100g ethernet mac

[HGand3]

In this architecture if the mac output is 512 bits how its is given to PCS as input,ie by what format 512 bits is converted and given to PCS.

[Mike_Intel]

Hello HGand3,

Thank you for posting in Intel Ethernet Communities. 

Before we proceed, let just ask if you are designing a system?

If you have questions, please let us know.

Best regards,

Michael L.

Intel Customer Support Technicians

A Contingent Worker at Intel

[HGand3]

Hi Mike,Thanks for your reply.Yes we are trying to develop 100g ethernet.

We have kintex 7 board,1st we have try ethernet here in this board.Then we have to look to develop our system.

Its along process i am in the beginning stage. Still i should know the basics right thats why looking for documents and forums where i can get help.

I gone through the document which is below,but here they didn't mentioned about what actually happens in PCS,PMA layers.

https://www.intel.com/content/www/us/en/programmable/documentation/aej1476205999080.html#nik1411172657466

[Mike_Intel]

Hello HGand3,

Base on your inquiry, we have specific forum for these issues and I will be transferring this thread for faster response. 

If you have questions, please let us know.

Best regards,

Michael L.

Intel Customer Support Technicians

A Contingent Worker at Intel

[CarlosAM_INTEL]

Hello, @HGand3​:

Thank you for contacting Intel Embedded Community.

Your consultations related to the cited third-party board should be addressed to the channels listed as a reference at the following website:

https://www.xilinx.com/support.html

Best regards,

@Mæcenas_INTEL​.