Complete RF Front End solution for 802.16d/e at 5.8 GHz

[HShah12]

We are looking for a complete RF front-end solution for 802.16d/e (at 5.8 GHz). We want to receive the 5.8 GHz RF data signal complies with 802.16d/e, demodulate or perhaps groom it and achieve a bit stream. Also, we want to do inverse, in fact we need a transceiver. These chip sets may include antenna, I/Q mixer, VCO, base band filter, gain amplifier, DDC, DUC, ADC and DAC.

Would you please help us to figure out the best set of chipsets you have and the reference design?

These chipsets would be used in a device which will have a potential for a high volume of sales in the wireless access sector.

[CarlosAM_INTEL]

Hello Hiva ,

Thank you for contacting Intel Embedded Community.

In order to help you, we suggest addressing your wireless request by filling out the https://www-ssl.intel.com/content/www/us/en/secure/forms/design-assistance.html Request Assistance form.

By the way, it is important to let you know that any consultation related to Intel wireless devices should be addressed to the https://communities.intel.com/community/tech/wireless Intel Wireless Networking Community.

We hope that the provided information may help you.

Best Regards,

Carlos_A.