Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Beginner
716 Views

EEPROM Access Tool (V 0.7.9) I211 Flash in UBUNTU18.04 for Tegra (ARM64, r32.4.2, Jetson Xavier NX)

Hi

  Eepromaccesstool 0.7.9 Dump error message "Check command open to write error" appears, (nvidia01-1.jpg)the dumped OTP file is empty 0.

If the flash has the wrong hex file, how to flash back?
Check the document "ethernet-controller-i210-i211-faq.pdf" 2.15 / 2.24. How to change "iNVM word address 0xA, bit 15 is set to 1b"? and Check the document "I211-Ethernet Controller-datasheet.pdf" 3.2.3, How to enable "SECURITY_EN"?
We have tried to pull pin12 down but the result is the same.

After we try to replace nVIDIA NX with nVIDIA Jatson NANO processor, we can successfully flash (nano-01.jpg).

After the community’s private message was updated in July, we did not read any more messages,
If you must use private messages, please attach email:   <removed>

Best regards,

0 Kudos
24 Replies
Highlighted
Beginner
564 Views

hello @idata 

  Can you help? We follow the suggestions to find Springville product, software/Driver/OS case category and Tool case Subcategory. The closest thing is this community, and it seems that there is no response.

Best Regards

 

0 Kudos
Highlighted
Moderator
545 Views

Hi Rchua1,

Thank you providing those information.

Please allow us some time to check on this. 

We will get back to you no later than 3 business days from now.



Best Regards,

Alfred S

Intel® Customer Support 


0 Kudos
Highlighted
Moderator
548 Views

Hi Rchua1,

To aid us in checking your concern, please provide us the result of this command:

ethtool -i xxxx where xxx is the field that the card is assigned to




Best Regards,

Alfred S

Intel® Customer Support 


0 Kudos
Highlighted
Beginner
541 Views

您好AlfredoS

 ethtool信息ethtool.jpg

最好的祝福,

 

0 Kudos
Highlighted
Beginner
535 Views

大陆不能上社交网站!比如;Twitter  Facebook   google

0 Kudos
Highlighted
Moderator
508 Views

Hi

Thank you providing those information.

Please allow us some time to check on this. 

We will get back to you no later than 3 business days from now.



Best Regards,

Alfred S

Intel® Customer Support 


0 Kudos
Highlighted
Beginner
495 Views

Hi @AlfredoS_Intel 

  Are there any updates? Did you find this problem?

The i211 network chip is on the carrier board of this product.  https://developer.nvidia.com/embedded/jetson-xavier-nx

Best Regards,

0 Kudos
Highlighted
Moderator
478 Views

Hi Rchua1,

Thank you for waiting for our update and for sharing the additional information:

While we were checking, these questions came in to mind which will help us find a recommendation for your issue:

  1. May we know the firmware version that you are updating the network adapter to?
  2. May we know the model of the board that you are using?
  3. Is the network cards embedded on the board design?


We look forward to your reply. Should we not get your reply, we will follow up after three business days.



Best Regards,

Alfred S

Intel® Customer Support Technician



0 Kudos
Highlighted
Beginner
471 Views

Hi @AlfredoS_Intel

  Thanks for your response.
1.i211 only update HEX format file and MAC address, no FW.
2.Carrier board model:EPG.
3.ARM NX PCIE signal to I211 on the carrier board.

Best Regards,

0 Kudos
Highlighted
Moderator
465 Views

Hi Rchua1,

Thank for your quick reply.

We will take note of the information that you have shared. 

We will continue to investigate on the issue.

We will strive to provide you with an update no later than Tuesday, August 4, 2020

Many thanks for viewing this message.

Have a wonderful day!



Best Regards,

Alfred S

Intel® Customer Support


0 Kudos
Highlighted
Beginner
461 Views

Hi @AlfredoS_Intel 

  Hope that good news and results will happen.

Best Regards,

 

0 Kudos
Highlighted
Beginner
398 Views

Hi @AlfredoS_Intel 
  Are there any updates? Did you find this problem? Some people have the same problem.

Best Regards

0 Kudos
Highlighted
Moderator
396 Views

Hi RChua1,

Thank you providing those information.

Please allow us more time to check on this.

We will get back to you no later than 3 business days from now.

 

 

Best Regards,

Alfred S

Intel® Customer Support


0 Kudos
Highlighted
Moderator
394 Views

Hi RChua1,

While we are investigating, we just want to confirm, are you trying to flash the PCI option ROM of the network adapter.

Looking forward to your reply. Should we not get your reply, we will follow up after 3 business days.



Best Regards,

Alfred S

Intel® Customer Support


0 Kudos
Highlighted
Beginner
390 Views

Hi  @AlfredoS_Intel 
  Run the eepromaccesstool079 program, and an error message appears (please refer to the attachment nvidia01-1.jpg for the issue on 7/16)
  Later, we also tried flash HEX-files, flash MAC, and of course the same error occurred. (nvidia01.jpg)

Best Regards,

0 Kudos
Highlighted
Beginner
339 Views

Hi @AlfredoS_Intel 
  Are there any updates? We tested that the old nVIDIA processor NANO can be used with i211 to flash normally, and the problem was discovered after replacing the NX launched this year.

Best Regards,

0 Kudos
Highlighted
Moderator
312 Views

Hi Rchua1,

We appreciate your patience in waiting for an update.

After reviewing your concern, we have confirmed that we have a forum for these kinds of issues and we will moving it to that ‘Forum’ so it can get answered more quickly.

Please wait for their reply within 1 to 2 business days.

Best Regards,

Alfred S

Intel® Customer Support


0 Kudos
Highlighted
Beginner
282 Views

Hi @AlfredoS_Intel 
  Are there any updates?  Or who is responsible for this issue?

Best Regards

0 Kudos
Highlighted
Moderator
254 Views

Hello, @RChua1:

Thank you for contacting Intel Embedded Community.

Based on the information provided you in the following forum, could you please clarify if you have followed our suggestion?

https://community.intel.com/t5/Embedded-Connectivity/EEPROM-Access-Tool-V-0-7-9-I211-Flash-in-UBUNTU...

We are waiting for your clarification.

Best regards,

@Mæcenas_INTEL.

0 Kudos