Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Beginner
122 Views

EEPROM Access Tool (V 0.7.9) I211 Flash in UBUNTU18.04 for Tegra (ARM64, r32.4.2, Jetson Xavier NX)

Eepromaccesstool 0.7.9 Dump error message "Check command open to write error" appears, the dumped OTP file is empty 0, the previous OTP burning back will also cause an error.

0 Kudos
9 Replies
Highlighted
Moderator
98 Views

Re: EEPROM Access Tool (V 0.7.9) I211 Flash in UBUNTU18.04 for Tegra (ARM64, r32.4.2, Jetson Xavier NX)

Hello, @RChua1​:

 

Thank you for contacting Intel Embedded Community.

 

We have contacted via email to help you.

 

Best regards,

@Mæcenas_INTEL​.

0 Kudos
Highlighted
Beginner
98 Views

Re: EEPROM Access Tool (V 0.7.9) I211 Flash in UBUNTU18.04 for Tegra (ARM64, r32.4.2, Jetson Xavier NX)

We did not receive the email, maybe it was filtered by the MIS server.

 For questions about the "Check command open to write error" message, please send an email to tom.lin@gigabyte.com.

thanks.

0 Kudos
Highlighted
Moderator
98 Views

Re: EEPROM Access Tool (V 0.7.9) I211 Flash in UBUNTU18.04 for Tegra (ARM64, r32.4.2, Jetson Xavier NX)

Hello, @RChua1​:

 

Thanks for your update.

 

We have sent again the email.

 

Best regards,

@Mæcenas_INTEL​.

0 Kudos
Highlighted
Beginner
74 Views

Re: EEPROM Access Tool (V 0.7.9) I211 Flash in UBUNTU18.04 for Tegra (ARM64, r32.4.2, Jetson Xavier

After the first successful refresh, we will not be able to refresh and change the MAC again.
Check the document "ethernet-controller-i210-i211-faq.pdf"  2.15 / 2.24.
How to change "iNVM word address 0xA, bit 15 is set to 1b"?

Check the document "I211-Ethernet Controller-datasheet.pdf" 3.2.3, How to enable "SECURITY_EN"?
We have tried to pull pin12 down but the result is the same.

Thank you.

https://community.intel.com/t5/Embedded-Connectivity/EEPROM-Access-Tool-V-0-7-8-not-working-for-prog...

https://community.intel.com/t5/Embedded-Connectivity/EEPROMARMTOOL-only-can-flash-I210-for-one-time-...

 

0 Kudos
Highlighted
Moderator
52 Views

Re: EEPROM Access Tool (V 0.7.9) I211 Flash in UBUNTU18.04 for Tegra (ARM64, r32.4.2, Jetson Xavier

Hello, @RChua1:

Thanks for your update.

Could you please clarify if you follow the suggestions that we provided in our previous email?

Best regards,

@Mæcenas_INTEL

0 Kudos
Highlighted
Beginner
40 Views

Re: EEPROM Access Tool (V 0.7.9) I211 Flash in UBUNTU18.04 for Tegra (ARM64, r32.4.2, Jetson Xavier

Hi @Mæcenas_INTEL 
We still haven't received a letter from the company's mailbox.

If the flash has the wrong hex, how to flash back?

thanks.

0 Kudos
Highlighted
Moderator
34 Views

Re: EEPROM Access Tool (V 0.7.9) I211 Flash in UBUNTU18.04 for Tegra (ARM64, r32.4.2, Jetson Xavier

Hello, @RChua1:

Thanks for your reply.

Based on the information provided to you the past June 22nd, 2020, we have sent a private message through this tool with the suggestion that we have provided to the email register on your profile for this forum.

Best regards,

@Mæcenas_INTEL

Tags (2)
0 Kudos
Highlighted
Beginner
9 Views

Re: EEPROM Access Tool (V 0.7.9) I211 Flash in UBUNTU18.04 for Tegra (ARM64, r32.4.2, Jetson Xavier

Hi @Mæcenas_INTEL 
  Sorry, after the Community update, the email disappeared.
After we try to replace nVIDIA NX with nVIDIA Jatson NANO processor, we can successfully flash (attached picture).

Best regards,

0 Kudos
Highlighted
Moderator
4 Views

Re: EEPROM Access Tool (V 0.7.9) I211 Flash in UBUNTU18.04 for Tegra (ARM64, r32.4.2, Jetson Xavier

Hello, @RChua1:

Thanks for your reply.

Please follow our suggestion provided via the private message of this portal sent by us.

Best regards,

@Mæcenas_INTEL.

 

 

0 Kudos