Embedded Connectivity
Intel network controllers, Firmware and drivers.
644 Discussions

Ethernet-Controller I210-IT PECLKx

MBre
Beginner
935 Views

Hello,

 

we would like to use the  Ethernet-Controller I210-IT in our design and I would like to know what are the voltage limits, threshold values and which communication standard should be used for PECLKp(Pin 26) and PECLKn(Pin 25). 

0 Kudos
9 Replies
Crisselle_Intel
Moderator
893 Views

Hello MBre,


Thank you for posting in Intel Ethernet Communities. 


Since your query involves design/customization with Ethernet-Controller I210-IT, please be informed that this will be best answered by our Embedded Connectivity Support team. We will help you to move this post to the designated team for further assistance. 


Please feel free to contact us if you need assistance from Ethernet support team.


Best regards,

Crisselle C.

Intel® Customer Support


MBre
Beginner
852 Views

Thank you very much for your support.

Then I will wait on Embedded Connectivity Support team

CarlosAM_INTEL
Moderator
820 Views

Hello, @MBre:

Thank you for contacting Intel Embedded Community.

Based on your first communication, could you please let us know the reasons to request this information?

We are waiting for your answer.

Best regards,

@CarlosAM_INTEL.

MBre
Beginner
795 Views

Hello @CarlosAM_INTEL ,

for a prototype we consider to use this IC as a ethernet controller. This IC has to be synchronized with the other electronics parts therefore we want to feed a clock signal in the I210. At least we need to know the communication standard (LVPECL,LVDS etc).

 

Best regards

 

Mirco

CarlosAM_INTEL
Moderator
772 Views

Hello, @MBre:

Thanks for your reply.

The information that may answer your question is stated in sections 12.1.2 and 11.6.29, on pages 805 and 799 of the document attached to your previous message.

Best regards,

@CarlosAM_INTEL.

 

MBre
Beginner
663 Views

Hello @CarlosAM_INTEL ,

 

thank you very much for your reply. Unfortunately this information doesn't help ne.

I have read both pages and i wanted to clarify my problem, maybe you can confirm this.

 

I have a 3.3V LVDS driver which will trigger the I210-IT ac coupled. Will this work? 

CarlosAM_INTEL
Moderator
587 Views

Hello, @MBre:

Thanks for your reply.

We sent another email with information that may help you.

Best regards,

@CarlosAM_INTEL.

MBre
Beginner
534 Views

Hello @CarlosAM_INTEL ,

 

can you please resend your mail, unfortunately i haven't received anything.

CarlosAM_INTEL
Moderator
520 Views

Hello, @MBre:

Thanks for your update.

We sent another email with information that may help you.

Best regards,

@CarlosAM_INTEL.

Reply