- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I plan to support the following on a new PCB.
WGI210ITSLJXT - Intel® Ethernet Controller I210-IT, -40°C to 85°C, Tray
WGI210ITSLJXS - Intel® Ethernet Controller I210-IT, -40°C to 85°C, Tape
WGI210ATSLJXQ - Intel® Ethernet Controller I210-AT, 0°C to 70°C, Tray
WGI210ATSLJXR - Intel® Ethernet Controller I210-AT, 0°C to 70°C, Tape
and the
WGI211ATSLJXZ - Intel® Ethernet Controller I211-AT, 0°C to 70°C, Tray
WGI211ATSLJXY - Intel® Ethernet Controller I211-AT, 0°C to 70°C, Tape
I believe that the only surrounding circuitry that I need to change for the I211 is to disconnect the flash. Is this correct and is there anything else that I need to consider?
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello DavidBleakley,
Thank you for posting in Intel Ethernet Communities.
Kindly confirm if you are into integrating or customization the I211 on your own board? If yes, we have a specific team who will be best to assist you and we will be glad to move this thread.
Looking forward to your reply.
We will follow up after 3 business days in case we don't hear from you.
Best regards,
Crisselle C.
Intel® Customer Support
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello DavidBleakley,
Good day!
This is just a follow up for the information requested so we can proceed checking your query. In case you have questions or clarifications, please do not hesitate to let us know.
Awaiting to your reply.
Should there be no reply, we will follow up after 3 business days.
Best regards,
Crisselle C.
Intel® Customer Support
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Sorry for the delay. I found the response emails in my spam.
This is a custom COMe carrier board that we are prototyping.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello DavidBleakley,
No worries at all. Appreciate your reply.
Since your query involves customization, please be informed that this will be best answered by our Embedded Connectivity Support team. We will help you to move this post to the designated team for further assistance.
Please feel free to contact us if you need assistance from Ethernet support team.
Best regards,
Crisselle C.
Intel® Customer Support
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello, @DavidBleakley:
Thank you for contacting Intel Embedded Community.
The information stated as answers to questions 2.9, 3.10, and 3.11; on pages 6, 13, and 14 of the document stated on the following website may answer your questions:
https://cdrdv2.intel.com/v1/dl/getContent/334026
Best regards,
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page