Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Beginner
882 Views

AHCI mode in debian 3.2.46-1 x86_64

Hi , I was wondering if anyone has been able to get an intel 82801hm/hem SATA controller running in AHCI mode as opposed to IDE mode. The motherboard I'm using is a EasyBoard-841E. The bios has a setting to auto detect AHCI mode , but it still insists on running in IDE mode. The output of a lspci -nn gives :-

00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] [8086:2828] (rev 04)

0 Kudos
1 Reply
Highlighted
Moderator
15 Views

Hello steve74,

Thank you for contacting the Intel Embedded Community.

We would like to help you, but you need to contact the manufacturer of your motherboard to receive the further help because they have all the information related to their products.

In order to help you, as a reference please address your problem to the following web sites and email address:

http://arbor.com.tw/support/support.aspx Global Service Policy - ARBOR

http://arbor.com.tw/product/product.aspx?Product_Name=EasyBoard-841E ARBOR - Embedded Computing, Mobile Computing, Industrial Automation, Busines Automation, Network Communication

mailto:support@arbor.com.tw support@arbor.com.tw

Please keep in mind that the support should be provided by the manufacturer of your motherboard.

Best Regards,

Carlos_A.

0 Kudos