Hi I am looking for a IDE and a JTAG connection to a PCB that has a SA1110 on it. Can you direct me to these? Thanks in advance. Ben Carroccio

[BCarr7]

Hi

I am looking for a IDE and a JTAG connection to a PCB that has a SA1110 on it.

Can you direct me to these?

Thanks in advance.

Ben Carroccio

[David_V_Intel]

Hello BCarr7, Thank you for posting on the Intel ® communities. I have moved the forum to the appropriate category. You will be contacted as soon as possible for assistance with your inquiry. Regards, David V Intel Customer Support Technician Under Contract to Intel Corporation

[CarlosAM_INTEL]

Hello, @BCarr7​: 

Thank you for contacting Intel Embedded Community.

Could you please let us know if the PCB related to your question has been design by you or a third-party company? In case that it is a third-party project, please give the part number, model, and where is stated the information related to it.

Waiting for your answer with the requested information.

Best regards,

@Mæcenas_INTEL​. 

[BCarr7]

The PCB is built by a third party for which we do service and preventative maintenance. Part Number: 3007431 Model Stellant Information related to: We are trying to determine where calibration and errors are recorded in memory. Using an IDE we feel this gives us the best chance to retrieve this information. Thanks in advance. Ben Carroccio

[CarlosAM_INTEL]

​Hello, @BCarr7​:

Thanks for your reply.

Could you please confirm that the third-party design related to your request can be found at the following website?

https://www.radiologysolutions.bayer.com/static/media/PDFs/2-1-3-1_Medrad-Stellant_CT_Injection-System/PP-M-STE-D-US-0016%20Stellant%20D%20with%20CWS%20Upgrade%20Brochure.pdf

We really appreciate your cooperation.

Best regards,

@Mæcenas_INTEL​. 

[BCarr7]

Confirmed.

[CarlosAM_INTEL]

​Hello, @BCarr7​:

Thanks for your reply.

In order to receive the proper information of the device related to your request, we suggest you contact their manufacturer because they handle the proper information related to it. You can contact them as a reference at the channels listed in the following website:

https://www.radiologysolutions.bayer.com/SSL/contact/

However, as a reference please review the information stated at:

http://ftp1.digi.com/support/documentation/jtag_sa11x0b.pdf

By the way, it is important to let you know the information stated as a reference as a well in the following websites:

https://www.infoworld.com/article/2678798/intel-puts-strongarm-on-death-row.html

https://www.arnnet.com.au/article/60553/intel_puts_strongarm_death_row/

Best regards,

@Mæcenas_INTEL​.

[BCarr7]

Thank you for your reply.

What IDE do you suggest to interface with the JTAG?

Ben

[CarlosAM_INTEL]

​Hello, @BCarr7​:

Thanks for your reply.

Based on our previous communication, you should follow our support suggestion to receive the proper information to answer your consultations of the cited third-party device.

Best regards,

@Mæcenas_INTEL​. 

[BCarr7]

I am unsure as to why you won't answer my question? What IDE do you suggest to interface with the JTAG http://ftp1.digi.com/support/documentation/jtag_sa11x0b.pdf?

[CarlosAM_INTEL]

​Hello, @BCarr7​:

Thanks for your reply.

Please let me paraphrase our previous communications, we would like to help you with your questions but the proper information of the third-party project related to your questions is handled only by its manufacturer.

By the way, the cited Intel device is not manufactured for more than fifteen years ago as you may notice on two of the provided websites. Also, doing a deep research through our sources there is no documentation available to provide support.

Due to these facts, please follow our suggestion to contact the support channels that the developer of the design associated to your questions has.

We hope you understand our recommendations.

Best regards,

@Mæcenas_INTEL​.