Embedded Server
Consolidate Considerations of Intel® Xeon and Atom server Hardware, Firmware, Software, and Tools

XEON D 1559 PCB

Athuljith
Novice
2,346 Views

Hi,

can you please help me to create the PCB footprint of XEON D 1559. Which documents I should reffere.

0 Kudos
5 Replies
CarlosAM_INTEL
Moderator
2,333 Views

Hello, @Athuljith:

Thank you for contacting Intel Embedded Community.

You can find the information that may help you is stated in sections 2.4, 6.0.1, 8.1, 8.5,  9.2.3, 9.2.7, 9.4.3, 9.4.7, 11.1, 14.2, 15.1, 19.1.2 of the Grangeville with Intel Xeon Processor D 1500 Product Family Platform Design Guide (PDG) document # 543448, and in the Intel Xeon D-1500 Product Family Reference Design Beverly Cove document # 544667. You can find them when you are logged into your Resource & Design Center (RDC) privileged account on the following websites:

http://www.intel.com/cd/edesign/library/asmo-na/eng/543448.htm 

http://www.intel.com/cd/edesign/library/asmo-na/eng/544667.htm

The RDC Account Support form is the channel to process your account update request or report any inconveniences with the provided sites. It can be found at:

https://www.intel.com/content/www/us/en/forms/support/my-intel-sign-on-support.html

Best regards,

@CarlosAM_INTEL.

0 Kudos
Athuljith
Novice
2,239 Views

Hi @CarlosAM_INTEL ,

We followed "Tlaquepaque Customer Reference Board [CRB] Alpha 2 Schematics" for creating Processor foot print. We are finding some uneven offsets in the pitch in that reference foot print. Can you please confirm the expected pitch? How much off set can be allowed? How can I verify the footprint?

0 Kudos
CarlosAM_INTEL
Moderator
2,232 Views

Hello, @Athuljith:

Thanks for your reply.

We want to help you.

Could you please clarify if the cited situation happens on all your implementation or it is a portion?

We are waiting for your answer.

Best regards,

@CarlosAM_INTEL.

 

0 Kudos
Athuljith
Novice
2,217 Views

Hi @CarlosAM_INTEL,

This issue is with the inside pins of the processor foot print. Outer pins position are seem correct. But inside pins pitch seams uneven in rows. Please find the attached footprint image. 

0 Kudos
CarlosAM_INTEL
Moderator
2,200 Views

Hello, @Athuljith:

Thanks for your reply.

You can find the information that may help you on pages 19, 26, 27, and 9 through 15 of the Manufacturing with the Intel® Microserver Platform Code Named Grangeville (Intel® Xeon® Processor D-1500 Product Family) document # 544983. You can find this document when you are logged into your Resource & Design Center (RDC) privileged account on the following website:

http://www.intel.com/cd/edesign/library/asmo-na/eng/544983.htm

The RDC Account Support form is the channel to process your account update request or report any inconveniences with the provided sites. It can be found at:

https://www.intel.com/content/www/us/en/forms/support/my-intel-sign-on-support.html

Best regards,

@CarlosAM_INTEL.

0 Kudos
Reply