Ethernet Products
Determine ramifications of Intel® Ethernet products and technologies
4874 Discussions

Arria 10 Ethernet Connection Issue

Altera_Forum
Honored Contributor II
‎03-22-2017 05:41 PM
1,076 Views

Hi everyone, 

 

I am having an issue with the ethernet connection dropping on the Arria 10 board after reprogramming the board with a bit file. On start-up I can ping the host computer from Linux running on the board or from the command line to the device and receive a reply. After reprogramming, any pings between the host computer and board receive no reply. Running ifconfig in the Linux terminal after reprogramming the board still shows the same ip address attached to the board before the reprogram. I've solved the issue in the past by power-cycling the board, closing and reopening Quartus, and programming the board again, but this method only works about 10% of the time. I can't reproduce why the issue is happening or why my fix sometimes works. Does anyone have experience with this or a similar issue? 

 

Thanks for any help/insight you can provide.
0 Kudos

Link Copied

0 Replies
Reply

Community support is provided during standard business hours (Monday to Friday 7AM - 5PM PST). Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.