Ethernet Products
Determine ramifications of Intel® Ethernet products and technologies
5287 Discussions

Can't capture pkts with an ethertype less than 0x05DC

NicoN
Beginner
1,396 Views

Hello, I am using an intel I350 card (igb driver) to monitor a specific network. Frames on this network have an ethertype less than 0x05DC. Tcpdump does not capture any frames on any port of the intel card, but if I use another card it works. I tried to modify all the parameters with ethtool, without success. Can you help me?

0 Kudos
7 Replies
NicoN
Beginner
1,318 Views

Bonjour, le port est connecté sur un réseau ethernet avec un ethertype commençant par 0x01... ce qui normalement  doit correspondre a la taille de la trame, mais ce n'est pas le cas, l'ethertype correspond a un type de trafic (non ip).  Est il possible d'utiliser une carte intel pour un reseau autre qu'IP ? avec des ethertypes commencant par 0x01...?

0 Kudos
Sazirah
Employee
1,307 Views

Hi NicoN,

 

Thank you for posting in Intel Ethernet Communities.

 

Please give me some time to check from my end and revert back to you as soon as possible regarding the issue.


Regards,

Sazzy_Intel


0 Kudos
Sazirah
Employee
1,258 Views

Hi NicoN,


Good day,


My apologies for taking some time to revert back here.


Regarding this, we have expert team to assist you further related to this issue. You may contact our IPS team by visiting link below. https://www.intel.com/content/www/us/en/design/support/ips/training/welcome.html


If you have any questions, please let me know.


Regards,

Sazzy_Intel


0 Kudos
Sazirah
Employee
1,213 Views

Hi NicoN,


This is related to your enquiries above, I would like to check if the issue has resolved?

If you have any questions or clarifications, please let me know.

 

Regards,

Sazzy_Intel


0 Kudos
NicoN
Beginner
1,206 Views

Bonjour Sazirah, le problème n'est pas résolu et nous n'avons pas eu le temps d'investiguer plus. Pour le moment nous prévoyons d'utiliser une autre carte.

Cordialement

Nicolas

0 Kudos
Sazirah
Employee
1,183 Views

Hi NicoN,


Thank you for your replying.


This is noted, if you have time to proceed, feel free to contact our IPS team to check on this issue. You may visit link below to contact them:

https://www.intel.com/content/www/us/en/design/support/ips/training/welcome.html


Since you are currently using other card, may I know if you require any help from our end? If no, we will proceed to close this forum.


Regards,

Sazzy_Intel


0 Kudos
Sazirah
Employee
1,157 Views

Hi NicoN,


Good day.


This is regarding your enquiries above. Since we have not seen an update, if you need any additional information, please submit a new question as this thread will no longer be monitored.


Regards

Sazzy_Intel


0 Kudos
Reply