Ethernet Controller (WGI210ITSLJXT) IBIS/SPICE model

[Supreeth07]

Hello Team,

We have a requirement and need this ECAD model for the initial PCI interface design validation using ANSYS HFSS software. And this verification and validation in HFSS for Radiation Emission.

Can I get IBIS/SPICE model for this Ethernet Controller (WGI210ITSLJXT).

 Regards,

Supreeth

[Hayat]

Hi Surpreeth07,

Thank you for posting in Intel Communities,

Since the inquiries is related to Design, Programming or Embedded Products, thus we will move the thread to Embedded Product Community forum.

Our dedicated team will assist you further on this request.

Regards,

Hayat

Intel Customer Support

[CarlosAM_INTEL]

Hello, @Hayat:

Thank you for contacting Intel Embedded Community.

It would help if you considered that this consultation is not related to an Intel Embedded platform supported through the channel you mentioned.

Please keep in mind this situation when this forum will be transferred.

Best regards,

@CarlosAM_INTEL.

[Hayat]

Hello Supreeth07,

Upon checking, we found that IBIS/SPICE is related to FPGA.

Thus, kindly post the questions or request to below community forum:

https://community.intel.com/t5/FPGA/ct-p/fpga

We will proceed to close the thread here.

Feel free to reach out to us if you have any questions.

Regards,

Hayat

Intel Customer Support