Ethernet Testing - Pattern generator (Windows 10 IOT enterprises - Intel® Celeron® N3350 (2 x 1.1 G)

[RAJESH_HCL2021]

Hi Team

                   We using Congatec SOM (Intel® Celeron® N3350 (2 x 1.1 GHz, 2 MB L2 cache, 6W)) for our Project, We planned to do Ethernet Compliance Testing 100Base-TX & 10Base-T,

we need support to Generate below Patterns 

1.Link Pulse

2.Pseudo-random sequence

3.All 1s or 0s

4.Scrambled idles

10Base-T
Test Name	Pattern Name
Link Pulse	Link Pulse
MAU	Pseudo-random sequence
TP_IDL	Pseudo-random sequence
Jitter	Pseudo-random sequence
Differential Voltage	Pseudo-random sequence
Harmonic	All 1s or 0s
Return Loss	Pseudo-random sequence
CM Voltage	Pseudo-random sequence

100Base-TX
Test Name	Pattern Name
Template	Scrambled idles
Differential Output Voltage	Scrambled idles
Signal Amplitude Symmetry	Scrambled idles
Rise Time	Scrambled idles
Fall Time	Scrambled idles
Rise/Fall Time Symmetry	Scrambled idles
Waveform Overshoot	Scrambled idles
Jitter	Scrambled idles
Duty Cycle Distortion	Scrambled idles or 0101 pattern
Return Loss	Scrambled idles

When we using a Ethernet Analyzer suggested below

If you are using a traffic generator to generate the signal, set the traffic generator to generate the signal pattern as listed in the table.
If you are not using a traffic generator to generate the signal, contact your PHY vendor for a special program to generate these patterns.

We can't Find Traffic Generator , Kindly assist us for getting  Traffic Generator or suggest a way(register setting or any) to Generate these Patterns for our Ethernet Testing for 100Base-TX & 10Base-T for Below mentioned Inter Processor in Windows 10 IOT Enterprises OS

Processor : Intel® Celeron® N3350 (2 x 1.1 GHz, 2 MB L2 cache, 6W)

Ethernet Controller : 2x Intel® I210 (Industrial) / I211 (Commercial) Gigabit Ethernet Controller with SDP support | 2x real-time trigger

Regards

R.Rajesh

+919566063348

[Mike_Intel]

Hello RAJESH_HCL2021,

Thank you for posting in Intel Ethernet Communities. 

Base on your post, let me check, are you designing a system with embedded Intel Ethernet card?

If you have questions, please let us know. In case we do not hear from you, we will make a follow up after 3 workings days. Thank you.

Best regards,

Michael L.

Intel® Customer Support

[Mike_Intel]

Hello RAJESH_HCL2021,

I hope you are having a good day. I just want to make a follow up on the information that I asked for me to assist you.

If you have questions, please let us know. In case we do not hear from you, we will make a follow up after 3 workings days. Thank you.

Best regards,

Michael L.

Intel® Customer Support

[Mike_Intel]

Hello RAJESH_HCL2021,

I am just sending another follow up on the information that I requested. 

Since we have not heard back from you, I need to close this inquiry. 

If you need further assistance, please post a new question. 

Thank you.

Best regards,

Michael L.

Intel® Customer Support