I knocked out the chip I 211at. Replaced it bought on the Internet. The ID is read 1532 instead of the expected 1539. I read on the Internet that I 211at needs to be programmed. How to flash and where to get the software? Help me please!

[Daniel_D_Intel1]

Hello SSeme2, Thank you for posting in Intel Ethernet Communities. Please register for Resource and Design Center to get the EEupdate tool for programming the I211. This will require a Non-disclosure agreement. https://www.intel.com/content/www/us/en/design/resource-design-center.html The I210/I211 FAQ may be helpful: http://www.intel.com/content/dam/www/public/us/en/documents/faqs/ethernet-controller-i210-i211-faq.pdf If you have any questions on the programming procedures please check with the Embedded Community: https://forums.intel.com/s/topic/0TO0P00000018NIWAY/embedded-products Let us know if you have any other questions. Best regards, Daniel D Intel Customer Support Under Contract to Intel Corporation

[SSeme2]

I am a private person, I do not represent any company. I am a private entrepreneur (self-employed, that is, without a legal entity), engaged in the repair of household and office equipment. Can I make a nondisclosure agreement? At the moment I am interested in the solution of a particular problem: to program I 211at so that the ID is not read as 1532, but as 1539. Respectfully, Sergey Semelin.

[VincentT_Intel]

Hi Sergey, Please visit the link below for existing discussion in the Embedded Community related to flash programming of I210. It should be similar approach to I211. https://forums.intel.com/s/question/0D50P00004905wQSAQ/i210-flash-programming?language=en_US Hope this helps. Best Regards, Vince T. Intel Customer Support Under Contract to Intel Corporation