Community
cancel
Showing results for 
Search instead for 
Did you mean: 
GPetch
Beginner
2,440 Views

I219-lm eeupdate.exe or equivalent to re-program the MAC address.

Jump to solution

I have an ASUS Prime Q370M-C motherboard PC with Intel I219-LM Networking. Owing to problems with BIOS I have ended up with the MAC being wiped and replaced with 888888888788. Is there an eeupdate.exe for this chipset or equivalent so that I can re-program the correct MAC address? Thanks,

0 Kudos

Accepted Solutions
Michael_L_Intel2
Moderator
1,286 Views

Hello GPetch,

 

Thank you for posting in Intel Ethernet Communities. 

 

Regarding EEUpdate tool, please open iur FAQ link: 

https://www.intel.com/content/www/us/en/support/articles/000023048/network-and-i-o/ethernet-products...

 

And you may contact Resource and Design Center for registration and access: 

https://www.intel.com/content/www/us/en/design/resource-design-center.html

 

However, it is recommended that you contact the board vendormanufacturer for modification made on the onbaord NIC, the OEM board vendor is the best person to handle the customization that might have made on the NIC integrated and to avoid any warranty issue of the board in case there is.

 

If you have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support

Under Contract to Intel Corporation

View solution in original post

21 Replies
Michael_L_Intel2
Moderator
1,287 Views

Hello GPetch,

 

Thank you for posting in Intel Ethernet Communities. 

 

Regarding EEUpdate tool, please open iur FAQ link: 

https://www.intel.com/content/www/us/en/support/articles/000023048/network-and-i-o/ethernet-products...

 

And you may contact Resource and Design Center for registration and access: 

https://www.intel.com/content/www/us/en/design/resource-design-center.html

 

However, it is recommended that you contact the board vendormanufacturer for modification made on the onbaord NIC, the OEM board vendor is the best person to handle the customization that might have made on the NIC integrated and to avoid any warranty issue of the board in case there is.

 

If you have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support

Under Contract to Intel Corporation

View solution in original post

GPetch
Beginner
1,286 Views

Hi Michael,

I already contacted ASUS support and they informed me that they didn't have the tool, hence my posting here. I can find numerous versions of eeupdate.exe but not the one for I219-lm so am seeking one here.

Thanks for the reply

Michael_L_Intel2
Moderator
1,286 Views

Hello GPetch,

 

Thank you for the quick reply. You may try contacting our Resource and Design center and check if they can help you. However, just to set the expectation. They may still advise you to contact your board manufacturer since they may have altered the NIC.

 

If you have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support

Under Contract to Intel Corporation

 

Michael_L_Intel2
Moderator
1,286 Views

Hello GPetch,

 

I just want to check if you already contacted  Resource and Design Center regarding this one?

 

If you have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support

A Contingent Worker at Intel

 

GPetch
Beginner
1,286 Views
Hi Michael, Yes I contacted but have not been given access I am afraid. Thanks, Stuart NUIT SAgE-Drummond (x86335)
Michael_L_Intel2
Moderator
1,286 Views

Hello GPetch,

 

Aside from that, we also recommends that you try to contact your board manufacturer since they are the one who embedded this NIC into the board.

 

If you have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support

A Contingent Worker at Intel

 

GPetch
Beginner
1,286 Views
Hi Michael, I have already tried ASUS and they say they don’t have eeupdate.exe. Stuart NUIT SAgE-Drummond (x86335)
Michael_L_Intel2
Moderator
1,286 Views

Hello GPetch,

 

You mentioned that you already contacted Resource and Design Center, can you provide the reference number via personal message for me to check it with them.

 

If you have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support

A Contingent Worker at Intel

GPetch
Beginner
1,286 Views
Michael, I’ve attached the two relevant emails. Stuart NUIT SAgE-Drummond (x86335)
Michael_L_Intel2
Moderator
1,286 Views

Hello GPetch,

 

Is there a reference number? So that I can check and help you with the follow up?

 

If you have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support

A Contingent Worker at Intel

 

GPetch
Beginner
1,286 Views
I couldn’t register to post anything. Stuart NUIT SAgE-Drummond (x86335)
Michael_L_Intel2
Moderator
1,286 Views

Hello GPetch,

 

Is there an error message? What was the last message sent you?

 

If you have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support

A Contingent Worker at Intel

Michael_L_Intel2
Moderator
1,286 Views

Hello GPetch,

 

Just want to check if you are now talking to Resource and Design Center support.

 

If you have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support

A Contingent Worker at Intel

 

GPetch
Beginner
1,286 Views
Michael, Sorry for the delay in replying but I have been away for a few days. I followed the link to Resource & Design Center (https://www.intel.com/content/www/us/en/design/resource-design-center.html) and tried to register but was refused. So there is no way to pose the question as far as I can see. Stuart NUIT SAgE-Drummond (x86335)
Michael_L_Intel2
Moderator
1,286 Views

Hello GPetch,

 

Please try to register first or contact them via email on this link.

 

https://www.intel.com/content/www/us/en/forms/design/registration-privileged.html

 

If you have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support

A Contingent Worker at Intel

 

GPetch
Beginner
1,286 Views
Michael, I’ve previously tried registering and been declined. I have emailed using the link on the page. Thanks, Stuart NUIT SAgE-Drummond (x86335)
Michael_L_Intel2
Moderator
1,286 Views

Hello GPetch,

 

Just kindly wait for their update since they are the one who can further assist you with your inquiries.

If you have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support

A Contingent Worker at Intel

Michael_L_Intel2
Moderator
1,286 Views

Hello GPetch,

 

Just want to check if you already received a reply from our RDC team?

If you have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support

A Contingent Worker at Intel

 

GPetch
Beginner
1,286 Views
Hi Michael, Still waiting: “Case#: 04262107 Case Subject: Resource & Design Center Account Support Request” Wednesday July 10. Stuart NUIT SAgE-Drummond (x86335)