The problem is my Intel i225 Network Adapter drops its network connection every time I start a backup using a Synology NAS requiring a restart of the PC to recover the network connection.
This is a new PC with an ASUS Prime Z490-A motherboard that has an onboard Intel i225-V #2 Ethernet Controller (I’ve tried driver Version 22.214.171.124 & 126.96.36.199 and Firmware NVM Version 1.56(1.38)). The PC is running Win10 Pro (Version 1909). The PC is backed up to a Synology NAS (DS1819+) using Synology’s Active Backup for Business app. Each time the NAS attempts to back up the PC, it pauses after about 1 ½ minutes and reports it is “Waiting for a network connection.” A moment earlier the PC dropped its network connection. Win10’s network status reports “No Internet access.” In Device Manager the network adapter reports “This device is working properly.” The only way to restore the network connection is to restart the PC. Upon restarting the adapter reconnects to the network and the NAS backup resumes for a few seconds before the network connection dies and the backup pauses waiting for a connection. The problem occurs whether using a scheduled backup or a manual backup.
The issue seems to be unique to the i225 adapter. I installed a 3rd party PCIe Ethernet adapter card & using that Ethernet port the backups run perfectly.
It seems that something the Synology NAS is asking the Intel i225 to do is shutting down the adapter. The problem could be with Intel’s chip, Synology’s software or the way ASUS uses the i225 on its new Z490 motherboards.
I’m stumped and would appreciate any suggestions for a solution.
Thank you for posting in our Intel® Ethernet Communities Forum.
We need to gather information so we can provide you recommendations.
Please download and run our Intel® System Support Utility from this link,https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility-for-Windows-. After running this program, it will create a text file. Kindly attach the text file on your reply.
Looking forward to your response. Should we not get your reply, we will follow up with you after three business days.
Intel® Customer Support
i just stumled over your post and hope i can help...
With the i225 adapters we have a lot of problems here in the company.
Somehow they seem to have a problem negotiating the network speed with switches.
Randomly you eiter have connection or not (most of the times not) and i found that lowering the network speed in the settings of your network adapter. The setting <auto> causes 90% of the time network problems or no network connection at all. Try to set it to 2500 or lower that should help.
Also there is a firmware update for the i225 provided by moterboard vendors that helped me to solve the problem to 100% so far.
Go to your motherboard vendor website and check for the LAN driver for your board, on the same page there should be a download for the firmware update.
I hope that helps solving the problem for you.
I am just sending another follow up to check if the suggestions provided by one of our community members addressed your concern.
If you still have further questions or clarifications, please feel free to post back a reply. We will keep the thread open for 3 business days, should we not hear from you we will be compelled to close the topic.
Intel Customer Support
Thanks everyone for your suggestions. It turns out there is some sort of conflict between the i225 Adapter and the encryption/compression used by Synology's Active Backup for Business system on the local network. Turning off encryption and compression fixed the problem for now. I can again use the i225 Ethernet connector and all is fine. It's not a perfect solution but it works for now.
Thank you for sharing the clever workaround that you discovered. There maybe other forum users that may have the same setup as you, and stumbling to this thread will definitely point them to the correct direction.
We will now be closing and locking this thread.
Thank you again for posting in our Intel® Ethernet Communities page.
Intel Customer Support