Ethernet Products
Intel® Ethernet products and technologies
Announcements
This community is designed for sharing of public information. Please do not share Intel or third-party confidential information here.
3933 Discussions

Omni-Path HFI Silicon 100 Series State: Initializing Physical state: LinkUp

PASOK2
Beginner
1,259 Views

Port State stays in Initializing state and not getting active

Omni-Path HFI Silicon 100 Series State: Initializing Physical state: LinkUp

# ibstat

CA 'hfi1_0'

CA type:

Number of ports: 1

Firmware version:

Hardware version: 11

Node GUID: 0x00117501017bf382

System image GUID: 0x00117501017bf382

Port 1:

State: Initializing

Physical state: LinkUp

Rate: 100

Base lid: 0

LMC: 0

SM lid: 0

Capability mask: 0x00410020

Port GUID: 0x00117501017bf382

Link layer: InfiniBand

#

4: ib0: mtu 2044 qdisc pfifo_fast state DOWN qlen 256

link/infiniband 80:00:00:02:fe:80:00:00:00:00:00:00:00:11:75:01:01:7b:f3:82 brd 00:ff:ff:ff:ff:12:40:1b:80:00:00:00:00:00:00:00:ff:ff:ff:ff

inet 10.100.0.3/8 brd 10.255.255.255 scope global ib0

valid_lft forever preferred_lft forever

0 Kudos
1 Reply
idata
Community Manager
191 Views

Hello, Asokan,

 

This product is not supported through this venue.

 

 

You can contact our Fabric team at the following URL:

 

 

https://www.intel.com/content/www/us/en/support/articles/000007466/network-and-i-o/fabric-products.h...
Reply