Port State stays in Initializing state and not getting active
Omni-Path HFI Silicon 100 Series State: Initializing Physical state: LinkUp
# ibstat
CA 'hfi1_0'
CA type:
Number of ports: 1
Firmware version:
Hardware version: 11
Node GUID: 0x00117501017bf382
System image GUID: 0x00117501017bf382
Port 1:
State: Initializing
Physical state: LinkUp
Rate: 100
Base lid: 0
LMC: 0
SM lid: 0
Capability mask: 0x00410020
Port GUID: 0x00117501017bf382
Link layer: InfiniBand
#
4: ib0: mtu 2044 qdisc pfifo_fast state DOWN qlen 256
link/infiniband 80:00:00:02:fe:80:00:00:00:00:00:00:00:11:75:01:01:7b:f3:82 brd 00:ff:ff:ff:ff:12:40:1b:80:00:00:00:00:00:00:00:ff:ff:ff:ff
inet 10.100.0.3/8 brd 10.255.255.255 scope global ib0
valid_lft forever preferred_lft forever
