PCI I210 network card is not working properly ， igb 0001:01:00.0 enP1p1s0: Reset adapter

[miller1]

hi，I am porting the PCI I210 driver, but I have been unable to obtain the IP and have been resetting the adapter. What is the reason?

[ 1031.022754] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1045.102736] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1054.062744] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1063.022745] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1077.102740] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1086.062719] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1095.022748] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1109.102761] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1118.062760] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1127.022737] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1141.102742] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1150.062763] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1159.022763] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1173.102746] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1182.062740] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1191.022765] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1205.102741] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1216.110734] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1225.070759] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1234.030701] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1242.990755] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1252.206760] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1262.190734] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1272.174727] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1282.158741] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1292.142751] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1301.102728] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1310.062740] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1319.022755] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1333.102733] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1342.062735] igb 0001:01:00.0 enP1p1s0: Reset adapter
[ 1351.022749] igb 0001:01:00.0 enP1p1s0: Reset adapter

[B_Y]

Hello @miller1,

Thank you for posting in Intel Ethernet Communities. 

May I know following info before we proceed further:

1) Are you designing a board and you are integrating the Intel I210 NIC card?

2) Please share the markings on front and back of the Intel I210 NIC card.

3) For your implementation, are you utilizing the most latest drivers that are supported?

You may refer to this article: https://www.intel.com/content/www/us/en/support/articles/000025890/ethernet-products.html

4) Does it work previously, is the NIC interface down?

Looking forward to hearing from you.

Best regards,

BY_Intel

Intel Customer Support

[B_Y]

Hello @miller1,

I hope this message finds you well. I am just sending a follow up if you have any questions from the previous post. If so, please let us know. Thank you.

Best regards,

BY_Intel

Intel Customer Support

[B_Y]

Hello @miller1,

Please be informed that we will now close this request since we haven't received any response from our previous follow ups. Just feel free to post a new question if you may have any other inquiry in the future as this thread will no longer be monitored.

Best regards,

BY_Intel

Intel Customer Support