PCIe to MAC (RGMII)

[JRütt]

I need an PCIe to RGMII (Ethernet MAC interface) Controller,

that could be run in 100Mbit and 1Gbit.

The PHY will be BroadR-Reach, and the 100/1000Base-T PHY is set.

Controller Data:

PCIe gen 2.5

RGMII MAC Interface for 100/1000 Mbit

If possible it shold be able to poll PHY's data via SMI/MDIO connection.

Otherwise a 100/1000 Mbit mixed setup is not readily possible.

...

Ich bräuchte einen PCIe to RGMII (Ethernet MAC interface) Controller,

der sowohl mit 100Mbit als auch 1Gbit betrieben werden kann.

Der PHY wird BroadR-Reach sein und 100/1000Base-T PHY festgelegt.

Controller Daten:

PCIe gen 2.5

RGMII MAC Interface for 100/1000 Mbit

Wenn möglich, sollte der Controller die Daten des PHY über SMI/MDIO pollen.

[idata]

Hello Jr178,

Thank you for posting in Intel Wired Ethernet Communities. Please let us research this request and get back to you. Will update you as soon as possible. If you have any other questions please let us know.Best regards,Daniel D

[idata]

Hello Jr178,

Thank you again for your interest in Intel Ethernet products. We currently do not offer an Ethernet controller that supports your requirements. If you have any other questions please do not hesitate to ask.Best regards,Daniel DIntel Customer Support

[idata]

Hello Jr178,

Just checking back if you were able to find the Ethernet controller you were looking for. If you are developing your own system your board manufacturer may be able to help you out. If you have any other questions feel free to contact us.Best regards,Daniel DIntel Customer Support