- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I have a XL710 adapter that I am unable to get setup. I am trying to set the mode using the qcu64e utility without any success:
# ./qcu64e /NIC=1 /INFO
Intel(R) QSFP+ Configuration Utility
QCU version: v2.26.17.06
Copyright(C) 2015 by Intel Corporation.
Software released under Intel Proprietary License.
QSFP+ Configuration modification is not supported by this adapter.
Here is the adapter I have:
# lspci | grep -i xl710
81:00.0 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)
81:00.1 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)
Any help you can provide would be greatly appreciated.
Thanks,
-J
Link Copied
2 Replies
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Jagga13,
Thank you for posting in Wired Communities. Please help provide additional information :
1) what is the exact XL710 model you have?
2) What is the module used on your XL710?
Please confirm if you are using the validated Intel modules listed at
https://www.intel.com/content/www/us/en/support/articles/000006051/network-and-i-o/ethernet-products.html
Feel free to update me to better assist you. Thank you.
Regards,
Sharon
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Jagga13,
Please feel free to provide the information.
Regards,
Sharon
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page