Ethernet Products
Determine ramifications of Intel® Ethernet products and technologies
5212 Discussions

Tape and Reel QFN package quadrant orientation for WGI210AT S LJXQ

Spitzer
New Contributor I
3,350 Views

Hi,

 

I'm looking for information about the Pin 1 Quadrant Location for the Intel® Ethernet Controller I210-AT with the following product code: WGI210AT S LJXQ.

 

I found that the I210 is packaged in a 64-pin 9x9 QFN package with e-Pad:

 

Spitzer_0-1706811608963.png

 

And that it can be ordered in T&R:

Spitzer_1-1706811678176.png

 

But I haven't found any document that specifies the part orientation for the T&R devices.

 

Any information would be appreciated. 

 

Thanks in advance! 

 

0 Kudos
15 Replies
Sreelakshmi1
Employee
3,316 Views

Hello Spitzer,

 

Thank you for posting in Intel community forum.

 

We recommend you refer to the Resource and Documentation Center for information about the Pin 1 Quadrant Location for the Intel® Ethernet Controller I210-AT .Please refer to the below link to access the Resource and Documentation Center:

 

https://www.intel.com/content/www/us/en/support/articles/000058073/programs/resource-and-documentation-center.html

 

Regards,

Sreelakshmi B

 


Spitzer
New Contributor I
3,225 Views

Thank you.

 

I did enter to the Resource and Documentation Center and found that it's a very helpful site as it has a specific page for all Intel's devices including the one I'm looking information about (Intel® Ethernet Controller I210).

 

But didn't found the exact information I'm looking for.

 

It appears that it's easier to find that type of information with other devices. Example: Intel® Enpirion® Power Solutions

 

Is there another way to find the information I'm looking for?

 

Thanks for your support

0 Kudos
Sreelakshmi1
Employee
3,260 Views

Hello Spitzer,


Greetings for the day!

 

We are following up to find out if you were able to find the information we provided. Please reply to confirm, so we can continue helping on a resolution. Looking forward to receiving your reply.

 

 

Regards,

Sreelakshmi B


Spitzer
New Contributor I
3,233 Views

Thank you for your quick support!

 

I'm applying now for the Intel® Resource and Documentation Center. I'm hoping to find there the information I'm looking for.

 

Thanks again!

0 Kudos
Sreelakshmi1
Employee
3,202 Views

Hello Spitzer,


Greetings for the day!


Thank you for sharing the update. Please note due to this product being discontinued, Intel Customer Service no longer supports inquiries for it, but perhaps fellow community members have the knowledge to jump in and help.


Please find the product change notification for Intel® Ethernet Controller I210 by following the below link.


https://www.intel.com/content/www/us/en/content-details/797593/intel-r-82580eb-gigabit-ethernet-controller-mm-905782-tray-mm-905781-tape-reel-intel-r-82580db-gigabit-ethernet-controller-mm-905786-tray-mm-905785-tape-reel-pcn-118016-02-product-discontinuance-end-of-life-and-replacement-recommendati.html

 

You may also find the Discontinued Products website ( https://www.intel.com/content/www/us/en/support/discontinued-products.html  ) helpful to address your request.


We regrettably need to close the request, if you still require assistance or have additional questions, Please don't hesitate to ask any further questions in the future. Feel free to start a new conversation, as this thread will no longer be monitored.


Thank you for understanding.

 

Regards,

Sreelakshmi B





Spitzer
New Contributor I
3,191 Views

Thank you for your response,

 

I'm sorry but think is a misunderstanding: the PCN shared is for the Intel® 82580EB Gigabit Ethernet Controller, not for the Intel® Ethernet Controller I210 series.

The exact product code I'm looking information about (WGI210AT) is still active and it also turns out to be the recommended replacement part for the EOL notification PCN shared, so it definitely can't be currently discontinued:

 

Spitzer_0-1707832526993.png

 

I'm starting a new thread hoping you can help me find the information I'm looking for.

0 Kudos
Sreelakshmi1
Employee
3,116 Views

Hello Spitzer,


Greetings for the day!


Please allow us sometime to check the details and we will get back with an update shortly.


Regards,

Sreelakshmi B


Spitzer
New Contributor I
3,109 Views

Hi Sreelakshmi B,

 

Thank you so much.

 

I'll wait patiently.

0 Kudos
Sreelakshmi1
Employee
3,071 Views

Hello Spitzer,

 

We apologize for the delay in our response. As per our validation, WGI210AT S LJXQ refers to tape only. Please refer to the below link for specific details. Please note that to access the link, we request that you login to CNDA.

 

https://www.intel.com/content/www/us/en/secure/care/mm/925131.html (MM # 925131)

 

Please refer to the below link for a guide to accessing CNDA.

 

https://www.intel.com/content/www/us/en/support/articles/000058073/programs/resource-and-documentation-center.html

 

 

Please find the below data sheet link for pin quadrant information:

 

https://cdrdv2.intel.com/v1/dl/getcontent/333016

 

Regards,

Sreelakshmi B


0 Kudos
Spitzer
New Contributor I
3,047 Views

Hi Sreelakshmi B,

 

I already checked the data sheet and all the documented information I could find.

 

Still cannot find the pin quadrant information. 

 

Here's an example of exactly what I'm looking for:

Intel® Enpirion® Power

 

I just want to confirm Intel's official standard for the T&R Packaging Pin 1 Quadrant Location for the WGI210AT. It only can be Q1, Q2, Q3 or Q4.

 

Could you help me with that specific information? 

 

Here's an example of a "Q3 Standard" Quadrant:

Spitzer_1-1708532192133.png

 

 

 

0 Kudos
Sreelakshmi1
Employee
3,029 Views

Hello Spitzer,


Greetings for the day!


Thank you for the information. We will check the details and get back with an update shortly.


Regards,

Sreelakshmi B


Sreelakshmi1
Employee
2,940 Views

Hello Spitzer,


Good day!

 

Since you were unable to locate the pin quadrant details for WGI210AT in the provided datasheet, we kindly request you to log in to the Intel® Resource and Documentation Center by referring to the below link.


 https://www.intel.com/content/www/us/en/support/articles/000058073/programs/resource-and-documentation-center.html



Thank you for understanding.

 


Regards,

Sreelakshmi B


0 Kudos
Spitzer
New Contributor I
2,925 Views

Hi, 

 

On ‎02-02-2024 you referred to me to that same link (please revise previous messages on this thread). I already checked the Intel® Resource and Documentation Center. The information I'm looking for it is not there.

 

All I need is to confirm the official Intel's standard T&R Packaging Pin 1 Quadrant Location of the WGI210AT S LJXQ.

 

Could you help me out?

0 Kudos
Sreelakshmi1
Employee
2,884 Views

Hi Spitzer ,


Good day!


Thank you for your reply.


As you were unable to get the required information from Resource and documentation center regarding query : Confirm the Pin 1 Quadrant Location of the WGI210AT S LJXQ, we recommend posting your query in the Embedded Community Forum to receive a quicker response by following the below link.


https://community.intel.com/t5/Embedded-Products/ct-p/embedded-products


kindly let me know once you have submitted your query in the link provided by selecting "Post a question" option.


Thank you for understanding.


Regards,

Sreelakshmi



0 Kudos
Sreelakshmi1
Employee
2,824 Views

Hi Spitzer ,


Good day! 


As we have referred you to embedded community regarding query: confirm the Pin 1 Quadrant Location of the WGI210AT S LJXQ, We would like to inform you that we are closing this request.


Please don't hesitate to ask any further questions in the future. Feel free to start a new conversation, as this thread will no longer be monitored.


Thank you for understanding.


Regards,

Sreelakshmi B

 


0 Kudos
Reply