Ethernet Products
Determine ramifications of Intel® Ethernet products and technologies
5044 Discussions

Wake On Lan not working on Intel Ethernet 1219-V

Just1Tobi
Beginner
962 Views

close

0 Kudos
4 Replies
IntelSupport
Community Manager
906 Views

HI Just1Tobi,

Good Day ~


Thank you for reaching Ethernet Community, Appreciate you can follow the steps to configure Wake On LAN as below:


Configure Wake on LAN in Windows 10/11 do the following:


  1. Press Win Key + X and click Device Manager
  2. Expand the Network adapters menu and look for your PCIe/Ethernet controller. Right-click on it and select “Properties”
  3. Navigate to the Power Management tab and enable all the checkboxes. Make sure that the “wake the computer” and “Only allow a magic packet to wake the computer” are checked
  4. After that move to the Advanced tab. Scroll down the list of options under the Property windows. Look for the “Wake on Magic Packet” option and enable it from the “Value” drop-down menu. Finally, click OK to save the changes
  5. Finally, restart your PC to enable the Wake on LAN feature on your Windows 10/11 PC


You can refer to the link below for the  Intel® Ethernet Adapter Complete Driver Pack :

Intel® Ethernet Adapter Complete Driver Pack


For further concern please do let us know.


Thank you & Best Regards,

Devi_Intel





0 Kudos
IntelSupport
Community Manager
906 Views

HI Just1Tobi,

Good Day ~

 

Thank you for reaching Ethernet Community, Appreciate you can follow the steps to configure Wake On LAN as below:

 

Configure Wake on LAN in Windows 10/11 do the following:

 

  1. Press Win Key + X and click Device Manager
  2. Expand the Network adapters menu and look for your PCIe/Ethernet controller. Right-click on it and select “Properties”
  3. Navigate to the Power Management tab and enable all the checkboxes. Make sure that the “wake the computer” and “Only allow a magic packet to wake the computer” are checked
  4. After that move to the Advanced tab. Scroll down the list of options under the Property windows. Look for the “Wake on Magic Packet” option and enable it from the “Value” drop-down menu. Finally, click OK to save the changes
  5. Finally, restart your PC to enable the Wake on LAN feature on your Windows 10/11 PC

 

You can refer to the link below for the Intel® Ethernet Adapter Complete Driver Pack :

Intel® Ethernet Adapter Complete Driver Pack

 

For further concern please do let us know.

 

Thank you & Best Regards,

Devi_Intel


0 Kudos
Devi_Intel
Employee
821 Views

Greeting Just1Tobi,


Regarding your case, we are following up to find out if you were able to complete the actions we previously recommended.


Please reply to this thread to confirm, so we can continue helping with a resolution. Looking forward to receiving your reply.


Thank you & Best regards,

Devi_Intel


0 Kudos
Devi_Intel
Employee
790 Views

Greetings Just1Tobi,


Your issue #05922588is now considered resolved, therefore we are proceeding to close this ticket.


If you have any more questions in the future, please don't hesitate to post a new question, as this thread will no longer be monitored.


Thank You & Regards

Devi_Intel


0 Kudos
Reply