WinPE and Intel 82574L network adapter troubles

[twalk5]

I've been having troubles getting WinPE 5.1 to accept the latest drivers from Intel for the 82574L gigabit Ethernet adapter. Even after adding the drivers to the WinPE image (oem1.inf), the OS insists on loading some old drivers and shows up as e1iexpress adapters via the net1ic64.inf file that has nearly the exact same profiles as for the correct and newer drivers. I can use DRVLOAD while in command shell in WinPE; however, those other drivers are still resident and overriding the load.

Is there a way to force load during starnet.cmd or any other way?

here is one section from the net1ic64.inf file found in winpe from Microsoft:

;-------------------------------------------------------------------------------

; Intel(R) 82574L Gigabit Network Connection;

[E10D3.6.2.1]

Characteristics = 0x84 ; NCF_HAS_UI | NCF_PHYSICALBusType = 5 ; PCIAddReg = e1c.reg, TcpSeg.reg, JumboPacket.regAddReg = CopperQR.reg, Copper1000.regAddReg = AIFS.regAddReg = RSS.reg, RSS2Q.regCopyFiles = win8.CopyFiles*IfType = 6 ; IF_TYPE_ETHERNET_CSMACD*MediaType = 0 ; NdisMedium802_3*PhysicalMediaType = 14 ; NdisPhysicalMedium802_3

[E10D3.6.2.1.Services]

AddService = e1iexpress, 2, win8.Service, win8.EventLog

[E10D3.6.2.1.HW]

AddReg = MSIX3.regInclude = machine.infNeeds = PciIoSpaceNotRequired

;-------------------------------------------------------------------------------

; Intel(R) 82583V Gigabit Network Connection;

[E150C.6.2.1]

Characteristics = 0x84 ; NCF_HAS_UI | NCF_PHYSICALBusType = 5 ; PCIAddReg = e1c.reg, TcpSeg.reg, JumboPacket.regAddReg = CopperQR.reg, Copper1000.regAddReg = AIFS.regCopyFiles = win8.CopyFiles*IfType = 6 ; IF_TYPE_ETHERNET_CSMACD*MediaType = 0 ; NdisMedium802_3*PhysicalMediaType = 14 ; NdisPhysicalMedium802_3

[E150C.6.2.1.Services]

AddService = e1iexpress, 2, win8.Service, win8.EventLog

[E150C.6.2.1.HW]

AddReg = MSIX1.regInclude = machine.infNeeds = PciIoSpaceNotRequired

here's the section from Intel's inf after conversion to oem1.inf (with adding driver from DISM into the boot.wim):

;-------------------------------------------------------------------------------

; Intel(R) 82575EB Gigabit Backplane Connection;[E10A9.6.2.1]Characteristics = 0x84 ; NCF_HAS_UI | NCF_PHYSICALBusType = 5 ; PCIPort1FunctionNumber = 0DelReg = Advanced.DelRegAddReg = e1q.reg, TcpSeg.reg, JumboPacket.regAddReg = Powermgmt.reg, WakeOnSlot.regAddReg = EnableWakeOnManagmentOnTCO.regAddReg = LLI.regAddReg = RSS.reg, RSS4Q.regAddReg = UninstallW2.regCopyFiles = win8.CopyFiles, UninstallProg.CopyFiles*IfType = 6 ; IF_TYPE_ETHERNET_CSMACD*MediaType = 0 ; NdisMedium802_3*PhysicalMediaType = 14 ; NdisPhysicalMedium802_3

[E10A9.6.2.1.Services]

AddService = e1qexpress, 2, win8.Service, win8.EventLog

[E10A9.6.2.1.CoInstallers]

AddReg = CoInstaller_AddReg, CoInKS.regCopyFiles = CoInstaller_CopyFiles

[E10A9.6.2.1.HW]

Include = machine.infNeeds = PciIoSpaceNotRequiredAddReg = MSIX.reg

;-------------------------------------------------------------------------------

; Intel(R) 82574L Gigabit Network Connection;

[E10D3.6.2.1]

Characteristics = 0x84 ; NCF_HAS_UI | NCF_PHYSICALBusType = 5 ; PCIDelReg = Advanced.DelRegAddReg = e1q.reg, TcpSeg.reg, JumboPacket.regAddReg = Powermgmt.reg, WakeOnSlot.regAddReg = EnableWakeOnManagmentOnTCO.regAddReg = Copper.reg, Copper1000.regAddReg = AIFS.regAddReg = RSS.reg, RSS2Q.regAddReg = UninstallW2.regCopyFiles = win8.CopyFiles, UninstallProg.CopyFiles*IfType = 6 ; IF_TYPE_ETHERNET_CSMACD*MediaType = 0 ; NdisMedium802_3*PhysicalMediaType = 14 ; NdisPhysicalMedium802_3

[E10D3.6.2.1.Services]

AddService = e1qexpress, 2, win8.Service, win8.EventLog

[E10D3.6.2.1.CoInstallers]

AddReg = CoInstaller_AddReg, CoInKS.regCopyFiles = CoInstaller_CopyFiles

[E10D3.6.2.1.HW]

AddReg = MSIX3.regInclude = machine.infNeeds = PciIoSpaceNotRequired