check marking for part#WGI211AT S LJXY ( s/o#540090 )

[JLiu18]

Hi There,

part#WGI211AT S LJXY

Our customer found above marking shows as below:
the 1st line: I@12
the 2nd line: 2004BGP
the 3rd line: WGI211AT
They want to know the marking meaning, could you help check and advise? Thanks.

[Mike_Intel]

Hello JLiu18,

Thank you for posting in Intel Ethernet Communities. 

Before we proceed, I need to gather the following details.

1. Where did you get this unit?
2. What is the model of the network chip?
3. Is it in Intel networking chip?
4. Are you designing a system or board with embedded Intel networking chip?

By the way, let me share this link. The only markings with description that we have a re Intel retail Ethernet cards.

You can find the markings description on this link. But again, this is for retail Ethernet cards.

https://www.intel.com.au/content/www/au/en/support/articles/000005625/services.html

If you have questions, please let us know. In case we do not hear from you, we will make a follow up after 3 workings days. Thank you.

Best regards,

Michael L.

Intel Customer Support Technicians

[JLiu18]

Hi Michael,

Please see below PO information, sales channel: Mouser US.

Part# WGI211AT S LJXY ( 925144 )           

PO: 029-RZ582

QTY: 210

Our customer just wants to know if marking shown as attachment correct?

Could you help check and advise?

Thanks.

[Mike_Intel]

Hello JLiu18,

Upon checking, WGI211AT is the ordering code and SLJXY is Spec code for Intel® Ethernet Controller I211-AT.

You can find that information here:

https://ark.intel.com/content/www/us/en/ark/products/64404/intel-ethernet-controller-i211-at.html#tab-blade-1-4-0

By the way, are you designing a system with this chip?

If you have questions, please let us know. In case we do not hear from you, we will make a follow up after 3 workings days. Thank you.

Best regards,

Michael L.

Intel Customer Support Technicians

[Mike_Intel]

Hello JLiu18,

I just want to check if you still have some clarifications regarding this thread.

If you have questions, please let us know. In case we do not hear from you, we will make a follow up after 3 workings days. Thank you.

Best regards,

Michael L.

Intel Customer Support Technicians

[JLiu18]

Hi Michael,

Thanks for your marking explanation.

The issue should be solved.

Jun Liu