FPGA Intellectual Property
PCI Express*, Networking and Connectivity, Memory Interfaces, DSP IP, and Video IP
6463 Discussions

Can HDMI2.1 be implemented using Arria 10 -3 grade FPGA?

NYao
Partner
1,115 Views

Dear,

I know we have HDMI2.1 demo using A10 development kit, can i using this IP on -3 grade devices? like 10AX027H4F34I3G?

0 Kudos
1 Solution
BoonT_Intel
Moderator
971 Views

Hi, It is recommended to use Arria 10 FPGA device with speed grade 2 or faster. You might facing timing issue if you use Speed grade -3

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_hdmi.pdf#page=15

View solution in original post

0 Kudos
6 Replies
BoonT_Intel
Moderator
972 Views

Hi, It is recommended to use Arria 10 FPGA device with speed grade 2 or faster. You might facing timing issue if you use Speed grade -3

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_hdmi.pdf#page=15

0 Kudos
NYao
Partner
971 Views

Hi BoonT,

Thanks.​

How about -2LG?I want to use 10AX066H3F34I2LG.

0 Kudos
BoonT_Intel
Moderator
971 Views

this device speed grade is -2. So it is good to go.

0 Kudos
NYao
Partner
971 Views

Dear,

​From HDMI UG below,

it recommend -1 for HDMI2.1 and -2,-1 for HDMI2.0,but i have implement HDMI2.0 on A10 -3 device successfully. Is there any risk if i use -2LG?

 

0 Kudos
NYao
Partner
971 Views

2020-02-27_233051.png

0 Kudos
BoonT_Intel
Moderator
971 Views

It is recommended to follow the table. Even you able to see the timing passing. But there still a risk marginal issue on it (even the lower speed grade -3 pass timing). Also, the internal hardware validation is carry on based on the recommended table.

0 Kudos
Reply