Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Partner
107 Views

Flash 加载问题

Hi你好,

在配置外部256M 第三方flash的时候, 选择epcq256进行jic加载会到98%停止并出错, 但是用nios的flash programmer烧sof+elf正常. error code: 209025,读silicon id出错

同工程之前用的epcs128烧写jic正常,但是后来需要加初始化配置所以不够大,所以换成256M的.

请问,这两种加载应该都要读silicon id吧? 有没有建议?谢谢。

0 Kudos
1 Reply
Highlighted
Employee
3 Views

Hi BJian12,

 

I believe you want to program the 3rd-party flash device.

I recommend you to use Generic Flash Programmer to load an FPGA configuration bitstream file into a Quad SPI flash memory device.

 

Quartus Prime supported:

  • Intel® Quartus® Prime Pro Edition 19.1 version onwards
  • Intel® Quartus® Prime Standard Edition 18.1.1 version onwards

 

User Guide:

 

 

Cheers

0 Kudos