Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Novice
261 Views

I'd like to try an Example Design for Avalon-MM Slave. Which one would you recommend to try with?

I'd like to try an Example Design for Avalon-MM Slave. Which one would you recommend to try with?

Tags (1)
0 Kudos
5 Replies
Highlighted
Employee
2 Views

Hello,

May I know which IP are you referring to?

Avalon-MM Slave could be any IP. Furthermore, which FPGA board are you using?

 

Thanks

0 Kudos
Highlighted
Novice
2 Views

Actually I use an EVB for Arria-10. As for the Avalon interface, I'm writing a custom module, which should have an Avalon-MM Slave Interface. So, I'd like to run some Example Design in order to see its behavioral.

0 Kudos
Highlighted
Employee
2 Views

Hello,

You can run it either by simulation, or by real-time on board.

I would recommend using Nios II as a processor and connect your custom component to it. With a simple C application, you can test this custom component.

Please refer to this tutorial:

 

ftp://ftp.intel.com/Pub/fpgaup/pub/Intel_Material/13.1/Tutorials/Making_Qsys_Components.pdf

 

 

 

Thanks

0 Kudos
Highlighted
Novice
2 Views

Actually I wanted to see a Verilog/VHDL code, which implements a Slave Avalon-MM interface. This interface should support different latency of transactions (latency 0, 1, ...)

0 Kudos
Highlighted
Employee
2 Views

Hello,

You can export the custom component ports to the top level verilog file. Next, you can connect it to your verilog logic and test your design. Furthermore, you can add signaltap to trace the signals while running on board.

Unfortunately we dont have such a design.

 

Thanks

0 Kudos