FPGA Intellectual Property
PCI Express*, Networking and Connectivity, Memory Interfaces, DSP IP, and Video IP
6462 Discussions

I'm using two intel's IPs ( SDI_II and sdi_v17) in different boards. I want to instantiate an HD-SDI communication. Is it possibile between two boards with different ips? Thank you for support.

BIdro
New Contributor I
‎09-04-2019 02:11 PM
716 Views

I'm using a CYCLONE V with the IP SDI_II as receiver and a CYCLONE IV GX with the IP sdi_v17 as transmitter. The interface hardware is the same for every board  (component LMH0387).

0 Kudos

Link Copied

1 Reply
CheePin_C_Intel
Employee
‎09-05-2019 05:18 AM
463 Views

Hi,

 

As I understand it,you have some inquiries related to interfacing SDI II and SDI v17 with HD-SDI. For your information, as I refer to the user guides for both IPs, they supports HD-SDI standard. Therefore, there should be no issue to interface between the two IPs between different boards as long as the IPs are configured to HD-SDI and the electrical specs are met between the two boards interfaces.

 

Please let me know if there is any concern. Thank you.

0 Kudos
Copy link
Reply

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.